Network Setup - Reconnect Options; Network Setup - Options Tab - Wyse Winterm S10 User Manual

Setting Up the Thin Client
After making a VDI Brokers entry, be sure to reboot the thin client to have the changes
take effect.
You can also click the PNA command button to open the Reconnect Options dialog
box, and further configure the connection for automatic reconnection.
Figure 15 Network Setup - Reconnect options
Figure 16 Network Setup - Options tab
Use the following guidelines:
• DHCP Option IDs - Enter the supported DHCP options (each value can only be used
once and must be between 128 and 254). For information on DHCP options, refer to
the Administrators Guide: Wyse ThinOS
• Interpret DHCP Vendor-Specific Info - Allows you to enable interpretation of DHCP
Vendor-Specific information.
• Tcp Timeout - Enter the number of 30 seconds for the timeout value of a TCP
connection. The value must be between 1 and 255 which means the connection
timeout value is from 1x30 seconds to 255x30 seconds.
TM
.
35