Network Setup - Servers Tab - Wyse Winterm S10 User Manual

34
Chapter 3
Figure 14 Network Setup - Servers tab
Use the following guidelines:
•
•
File Servers/Path, Username, and Password - IP address or host name of the FTP
server that provides the system software and update images. The address can be
supplied through DHCP if DHCP is used. Use the following guidelines:
• File Servers/Path - Allows 128 characters maximum. The data specifies part of the
path to be used when the server is accessed. Multiple file servers/paths may be
named, as long as all data fits in the length limitation.
• Username - To log in to the FTP server. Use 15 characters maximum.
• Password - To log in to the FTP server. Use 15 characters maximum.
Note
The FTP server also provides global and user profiles (if they exist), optional
custom bitmaps to modify the appearance of the login window (if used), and
bitmaps for custom icons to be used when displaying connections on the
desktop.
PN Agent/Lite Servers, Rapport Servers, Time Servers, VDI Broker Type, and VDI
Brokers - List of IP addresses or host names with optional TCP port number of Time
servers. Each entry with optional port number is specified as Name-or-IP:port, where
:port is optional. If not specified, port 80 is used. Locations can be supplied through
user profiles if user profiles are used. The Time server(s) provide thin client time based
on the settings of time zone and daylight saving information. If DHCP is used, locations
can be supplied through DHCP.
Use the VDI Broker Type to set the type of VDI broker. The options are Default and
VDM (VMware Virtual Desktop Manager). Choose VDM to enable VDM 2.1 XML
support.
Note
The Virtual Desktop Broker supports both http and https, and depends on the
Virtual Desktop Broker server support. If http or https is not specified on the
Virtual Desktop Broker server, then http is used by default. If https is
specified, the client side must install a corresponding root certificate.