Adding And Deleting Tcx Licenses Manually; Configuring Touch Screens - Wyse Winterm S10 User Manual

48
Chapter 3

Adding and Deleting TCX Licenses Manually

Although, Wyse recommends entering TCX licenses in the INI file (so they will be loaded
automatically upon thin client boot), the TCX License dialog box allows you to activate
TCX features by entering licenses manually.
To add TCX licenses manually:
1. Open the TCX License dialog box (Desktop Menu | System Setup | TCX License).
2. Enter the license in the Input TCX License box (you can enter more than one license
3. Click Add. The license will be added to the Licenses list.

Configuring Touch Screens

The Touch Screen Setup window allows configuration of touch screens that are connected
to the thin client (USB and Serial). The setup window is automatically invoked when the
terminal detects that a touch screen is attached through a USB port and the setup (or
calibration) has not been performed. In addition, the calibration sequence is executed
whenever Touch Screen is selected from the Desktop menu.
The Touch Setup window prompts you to touch two circles on the screen to make the
necessary calibration adjustment. Once calibrated, the adjustment values are saved in the
local terminal NVRAM until the system is reset to factory default, or another type of touch
monitor is connected.
using commas for separation).
Note
You can delete a license by selecting it from the Licenses list and clicking
Delete.
Note
The Touch Screen Desktop menu item is grayed out until a touch screen is
connected. All ELO USB-based touch monitors and the M150-USB touch
monitor from MicroTouch are supported.