Lazer Safe PCSS-F Series Technical Manual page 41

LS-CS-M-023
B12-31 B11
N/A Station
4
If a single station mode is selected then the 1 Foot – 1 Foot mode is selected and the
corresponding station B8 to B11 is selected by the CNC. If the mode selected on the CNC is
the 2 Foot - 2 Foot dual operator mode, both operator stations will be allowed to initiate down
movement, when two corresponding stations B8 to B11 are selected by the CNC.
4.5.2.1 Option Selection
To select down switch option 6 during the PCSS configuration, set the initial value for down
switch option selection variable to 6 as described the F Series Technical Manual. This will
ensure that this option and all required inputs are initialised when the PCSS software is started.
Original Language Version: 1.02
B10 B9 B8
Station Station Station
3 2 1
B7 B6 B5 B4
N/A Station 4H- 4H-
4H 2F
02
PCSS-F Additions Technical Manual
B3 B2 B1 B0
2F- 2H- 2H-F F-F
2F 2H
Page 4-31
Released: 03/12/2013