Lazer Safe PCSS-F Series Technical Manual page 2

PCSS-F Additions Technical Manual
D o c u m e n t S t a
D o c u m e n t S t a
Document Reference Code:
Version:
Released:
D o c u m e n t R e
D o c u m e n t R e
Date Manual Software
Version Version
01/01/2008 0.01 n/a
14/01/2008 0.02 n/a
17/01/2008 0.03 n/a
21/01/2008 0.04 n/a
31/01/2008 0.05 n/a
06/02/2008 0.06 n/a
16/05/2008 0.07 n/a
28/05/2008 0.08 FB 1.03.00
30/05/2008 0.09 n/a
05/08/2008 0.10 n/a
26/09/2008 0.11 FB1.05.12
19/11/2008 0.12 FB1.10.01
18/10/2010 0.13 FB1.17.10
23/06/2011 1.00 FB1.18.00
30/06/2011 1.01
03/12/2013 1.02 FB1.26.00
Page ii
Original Language Version: 1.02
t u s
t u s
LS-CS-M-023
1.02
03/12/2013
v i s i o n H i s t o r y
v i s i o n H i s t o r y
Summary of Change
Initial release of addendum.
Updated Option Compatibility Table to match latest kernel release.
Changed communications protocol to ser4_a8.
Corrections to document.
Addition of error reset and changes to document.
Added ser4_a9.
Added down enable 17 and emergency stop 7 options for E Series
Trumpf Machines.
Back gauge and switch monitoring added to emergency stop option
7.
Change to down enable 16 timing diagram and enabled valve monitor
2 for all hardware.
Added details for emergency stop 6 – ON switch monitor.
Correction to wiring in Figure 4-20 and 4-21.
Removed block laser limit switches Section 4.3.2.2
Added Error Reset Option 5 – No station indicators
Changed Down Enable Option 17 – Added Y06/Y07
Added operations specifications, Section 6.
Added CNC brake activation for E-Stop option 7.
Added robot gate switch operation for E-Stop option 6.
Added movement monitoring details.
Added down switch option 6.
Release
Additional page for Declaration of Conformity
General document review
Removed Specifications section 7 as contained PCSS-F Technical
Manual
Removed Declaration of Conformity section 8 as contained PCSS-F
Technical Manual
Removed Option Compatibility section 4.1
Updated section 3 detailing the serial communications interface
LS-CS-M-023
Released: 03/12/2013