Table of Contents
Advertisement
Quick Links
EVMX42MV Quick Start Guide
4K 4×2 Seamless Audio and Video
Matrix with Multiview
Safety Instructions
For optimum performance and safety, please read these instructions carefully before use and keep this manual for
future reference. Please have the part number, serial number, and invoice available when requesting support.
• To prevent electric shock, please ensure that all apparatus is properly grounded.
• Place the device in a well-ventilated area, do not block any ventilation openings.
• Do not expose this apparatus to rain or place it near water. Any liquid that goes into the apparatus may cause a failure, fire,
or electric shock.
• Do not place the device on an uneven or unstable surface. The device may fall resulting in a malfunction.
• Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
• If a third-party power supply is used, please ensure that the power supply specifications meet the product requirements.
Introduction
The Evolution by Vanco EVMX42MV 4×2 HDMI Matrix allows up to four HDMI sources to be distributed up to two displays
with full seamless switching flexibility. The EVMX42MV features the ability of passing 4K@60Hz resolution and 4:4:4
chroma subsampling with HDR. Multiple sources can be displayed independently on either, or both displays. Users can
display one, two, three, or all four sources at once using any of the eight different built-in display modes. Audio can be
set to any source in multiview mode, with the ability of breaking out audio with analog and digital connections. With the
ability to control switching via the front panel, IR, RS-232, and TCP/IP, along with an easy and intuitive user interface, the
EVMX42MV is a great solution for digital signage, sports bars, collaboration spaces, and more.
Product Features
•
Supports 4K@60Hz, 4:4:4 Chroma with HDR
•
Delivers signals from up to 4 sources independently to 2 displays
•
Multiview mode allows for multiple sources to be displayed on one screen
•
8 different modes for customized multi-view applications
•
Each output is fully independent and can display different sources even in multiview mode
•
Seamless switching and routing of audio and video
•
Analog and digital audio breakouts
•
Controllable via front panel, IR, RS-232 and TCP/IP
•
Easy and intuitive user interface for setup and to control switching
•
HDMI 2.0 and HDCP 2.3 compliant
•
Rack mountable design
EVMX42MV Product Manual
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vanco EVOLUTION EVMX42MV
Summary of Contents for Vanco EVOLUTION EVMX42MV
- Page 1 • If a third-party power supply is used, please ensure that the power supply specifications meet the product requirements. Introduction The Evolution by Vanco EVMX42MV 4×2 HDMI Matrix allows up to four HDMI sources to be distributed up to two displays with full seamless switching flexibility. The EVMX42MV features the ability of passing 4K@60Hz resolution and 4:4:4 chroma subsampling with HDR.
-
Page 2: Packaging Contents
Packaging Contents (1) EVMX42MV 4K 4x2 Seamless Audio and Video Matrix with Multiview (1) IR remote (1) IR receiver (1) 12V/2.5A locking power supply (1) RS232 DB9 male to female cable (2) Rack mounting ears (8) Mounting screws (1) Quick start guide Product Specifications Technical HDMI compliance... - Page 3 Mechanical Housing Metal enclosure Color Black Weight 2.23kg / 4.9lbs Dimensions 440mm x 203mm x 44.5mm / 17.32” x 8.00” x 1.75” Input: AC100-240V (50/60Hz) Power supply Output: DC 12V/2.5A, CE/FCC/UL PSU Full Load: 22W No Load: 9.6w Power consumption Standby Mode: 1.44W 0-40°...
-
Page 4: Panel Descriptions
Panel Descriptions Front Panel Emits green when the product is on and active, and red when the product is in Power LED standby mode. Output Channel Selection Buttons. Press OUTPUT 1/2 button to select output Output 1/2 Buttons channel 1 or 2 Turns on/off the input auto switching function (only available in single display mode). - Page 5 Rear Panel TCP/IP Port Ethernet port to connect to network, computer, or control system RS232 Port RS232 serial control port to connect to a computer or control system L/R: PCM 2.0 analog audio output OUT 1 Ports OPTICAL: Optical digital audio output HDMI: HDMI 1 output L/R: PCM 2.0 analog audio output OUT 2 Ports...
-
Page 6: Connection Diagram
Connection Diagram Computer or Television 1 Television 2 IR Receiver Control System Power Supply Audio Amplifier Audio Amplifier Laptop Blu-ray Player TV Box 1. Connect sources such as a Blu-ray player, game console, A/V receiver, etc. to the HDMI inputs on the unit. Insert and extract cables carefully with the power switched off. - Page 7 IR Remote 1. Power button: press this button to power on the matrix switcher or set it to standy mode. 2. Mute button: press this button to mute/unmute the audio 3. HD 1/2/3/4: press these buttons to select the input source in single screen display mode.
-
Page 8: Edid Settings
EDID Settings Select the following modes via OSD menu navigation (USER is USER 1). EDID Mode EDID Mode 4K60-2.0CH 1680x1050-2.0CH 4K60-5.1CH 1600x1200-2.0CH 4K60-7.1CH 1440x900-2.0CH 4K30-2.0CH 1360x768-2.0CH 4K30-5.1CH 1280x1024-2.0CH 4K30-7.1CH 1024x768-2.0CH 1080P-2.0CH 720P-2.0CH 1080P-5.1CH AUTO 1080P-7.1CH USER 1920x1200-2.0CH User can select following EDID modes via RS-232 commands or Web UI. EDID Mode EDID Mode 4K60-2.0CH... - Page 9 Scaling The switcher supports multiple resolution video inputs up to 3840x2160@60 and supports multiple audio formats (PCM2.0/5.1/7.1CH, Dolby Digital/Plus/ EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio) pass-through function via HDMI cable. The switcher supports the following video output resolutions: Output Resolution Output Resolution 4096x2160p 60Hz...
- Page 10 4096x2160p 60Hz 4096x2160p 50Hz 3840x2160p 60Hz 3840x2160p 50Hz 3840x2160p 30Hz 3840x2160p 25Hz 1920x1200p60Hz RB Resolution 3840x2160p60 1920x1080p 60Hz 1920x1080p 50Hz Output 1360x768p 60Hz 1280x800p 60Hz 1280x720p 60Hz 1280x720p 50Hz 1024x768 60Hz BLACKSCREEN BLACKSCREEN, BLUESCREEN ON, OFF Single Input select HDMI1, HDMI2, HDMI3, HDMI4 Win1 Select HDMI1, HDMI2, HDMI3, HDMI4 Win2 Select...
- Page 11 WIN1, HDMI1, HDMI2, HDMI3, HDMI4 Audio Select WIN1 AUDIO AUDIO-MUTE ON, OFF 4K60-2.0, 4K60-5.1CH, 4K60-7.1CH, 4K30-2.0CH, 4K30-5.1CH, 4K30-7.1CH, 1080P-2.0CH, 1080P-5.1CH, 1080P-7.1CH, 1920x12002.0CH, 1680x1050- EDID 4K60-2.0 2.0CH, 1600x1200-2.0CH, 1440x900 -2.0CH, 1360x768-2.0CH, 1280x1024-2.0CH, 1024x System 768-2.0CH, 720P-2.0CH, AUTO, USER1 Baud rate 115200 115200, 57600, 38400, 19200, 9600 Reset...
-
Page 12: Status Page
If the IP address is changed, it is important to record the new IP address, if it cannot be located, the IP address can be found using RS-232 control by using the Vanco Serial Tool found on the Vanco website (https://www.vanco1.com/faq/), and send the ASCII command “... -
Page 13: Input Page
Presets 1. Click to type in a custom name for the preset 2. Sets and recalls the preset 3. Saves the current matrix configuration 4. Clears and resets the preset Input Page The Input Page allows for changes and setup of EDID for each of the HDMI source inputs. 1. -
Page 14: Multi-Viewer Mode
Output 1/2 Page Multiview display modes can be set for HDMI OUT 1/2 on the corresponding Output 1/2 page. There are eight modes available: Single, PIP, Dual 1, Dual 2, Triple 1, Triple 2, Quad 1, Quad 2. Multi-Viewer Mode: Click the multiview mode button to select the required mode, then the selected mode will be displayed on the Multi-Viewer Adjustment interface, as shown in the figure below. -
Page 15: Input Source
16:9: Press this button to set the windows display aspect ratio to be 16:9 for Dual 1/Dual 2/Triple 1/Triple 2/ Quad 2 display mode. Input Source Select the input signal source. Select the window in “Multi-Viewer Adjustment” first, and then then “Input 1/2/3/4”. -
Page 16: Network Page
User In the PIP (Picture In Picture) mode, check the User box to enter the user-defined mode, then set the Start Point X, Start Point Y, Width and Height to customize the size and location of the secondary source. After setting, click Set button to confirm the setting and take effect. -
Page 17: Modify User Password
Modify Network Setting: Modify the IP Mode/IP Address/Gateway/Subnet/Telnet Port, click “Save” to save the settings. If the IP Mode is “Static”, manually set the IP Address/Gateway/ Subnet/Telnet Port as needed. If the IP Mode is “DHCP”, the unit will automatically be assigned an IP address by the local network. Modify User Password Click the “User”... -
Page 18: System Page
System Page 1. Panel Lock: Click to lock/unlock panel buttons. “ON” indicates that panel buttons are unavailable; “OFF” indicates panel buttons are available. 2. Beep: Click to turn on/off the beep. 3. Serial Baud Rate: Click the value to set the Serial Baud Rate. 4. -
Page 19: Limited Warranty
Such specific warranties are available upon request to Vanco. A surge protector, power conditioner unit, or an uninterruptible power supply must be installed in the electrical circuit to protect against power surges.
Need help?
Do you have a question about the EVOLUTION EVMX42MV and is the answer not in the manual?
Questions and answers