Related Manuals for Vanco VPW-280781
Summary of Contents for Vanco VPW-280781
- Page 1 HDMI® UTP RECEIVER For Use with VPW-280709; VPW-280608 HDMI 8x8 Matrix ® over UTP Receiver Vanco Part Number 280781 VPW- www.vanco1.com • 888.769.4156...
- Page 2 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
- Page 3 HDMI® Receiver - Part Number VPW-280781 The Vanco 280781 HDMI Receiver uses 2 UTP cables to transport a HDMI signal from the Vanco 280709 HDMI 8x8 Matrix Selector Switch or VPW-280608 HDMI 1x8 Splitter over UTP. This allows the HDMI signal to be transported a maximum distance of 50 meters (164 ft) while using dual Cat-5e or Cat 6 UTP cable as the transmission media.
-
Page 4: Package Contents
CONNECT AND OPERATE 1. The VPW-280781 Receiver works in conjunction with VPW-280709, VPW-280608. 2. Connect dual Cat 5e or Cat 6 cable assemblies from the UTP outputs on the Matrix/Splitter switch to the UTP inputs of the 280781 Receiver. Cables should be terminated to TIA T568B and connected respectively to #1 and #2 inputs and outputs. -
Page 5: Specifications
SPECIFICATIONS Operating Temperature Range ........-5 to +35°C (41 to +95 °F) Operating Humidity Range .......... 5 to 90 % RH (no condensation) Input Video Signal ............0.5-1.0 volts p-p Input DDC Signal ............5 volts p-p (TTL) Video Format Supported ..........DTV/HDTV;1080p/1080i/720P/576P/480P/576i/48 Output Video ............. - Page 6 TROUBLE-SHOOTING 1. Best results are usually achieved when the source and display resolutions are the same. If resolutions differ, the splitters will try to adjust the signal to match the resolution of the HD TV with the lowest resolution. This will result in a picture with a lower resolution on the other HD TV sets. 2.
-
Page 7: Limited Warranty
Vanco, at its option, will repair or replace this product without charge. Any defective parts replaced become the property of Vanco. This warranty does not apply to those products which have been damaged due to accident, unauthorized alterations, improper repair, modifications, inadequate maintenance and care, or use in any manner for which the product was not originally intended. - Page 8 ® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 888.769.4156 fax: 630.879.9189 visit: www.vanco1.com...
Need help?
Do you have a question about the VPW-280781 and is the answer not in the manual?
Questions and answers