DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
Page 3
4 displays simultaneously. Have multiple sources displayed simultaneously on any display or have a single source duplicated on multiple displays, flexibility for the perfect solution. The 280564 is capable of up to 4K2K (2160p) Ultra High Definition resolution and HD multi-channel audio distribution with simple control using the front panel or remotely via IR Receivers at display locations.
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: • (1) 280564 HDMI 4x4 Matrix Selector Switch • (5) IR Receiver (RX) • (4) IR Blaster (TX) • (1) DC 12V, 2.5A power supply...
PANEL DESCRIPTIONS 1. ON/OFF: Power ON/OFF switch 2. POWER: This red LED illuminates when the device is powered 3. IR EYE: IR eye which receives IR signals from included remote for matrix switching 4. OUTPUT A: Selects and displays which specific input is selected 5.
Page 6
EDID The EDID switch allows for EDID learning or to pre-set an EDID to encourage a “handshake” between the display and source. The EDID learning function is only necessary whenever any display on the HDMI output port is not outputting audio and video properly.
Page 7
OPERATION CONTROL - IR REMOTE CONTROL OUTPUT A: Pressing the 1\2\3\4 buttons will select input source to HDMI OUTPUT A, the LED will indicate the corresponding input source. OUTPUT B: Pressing the 1\2\3\4 buttons will select input source to HDMI OUTPUT B, the LED will indicate the corresponding input source.
Page 8
OPERATION CONTROL - SOFTWARE CONTROL THROUGH RS-232 1. Controlling the Matrix unit 1. Select RS232 COM or TCP mode 2. Select RS232 COM port 3. Click to connect or disconnect PC and Matrix 4. Select Matrix IP 5. Connect to Matrix IP 6.
Page 9
2. EDID 1. Set EDID mode for selected Input port or All Input ports, click “Set” button to complete action 2. Select EDID setting desired 3. Select Input port 4. Copy EDID from Output port to selected Input port or All Input ports, click “Set” button to complete action. 5.
Page 10
3. Matrix Switching Control via Software 1. Displays which Input is selected for respective Output 2. Click to select Input for respective Output 3. Click to select previous or next Input for respective Output www.vanco1.com...
Page 11
4. Firmware Update 1. Click to open firmware file (file extension is “.fw”) 2. Displays the firmware file path 3. Displays progress of the software update 4. Click to update the Matrix software 5. Displays messages of the software update 6.
CONNECT AND OPERATE IR Transmitter IR Receiver 1. Connect up to 4 sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI inputs on the unit. 2. Connect the output HDMI ports, starting with output 1, to high-definition displays such as an HDTV or HD projector that has HDMI inputs.
Page 13
IR BLASTER Plug IR Blaster into IR TX port of matrix unit (280564); place blaster in front of the IR eye of the corresponding source. IR RECEIVER Plug IR Receiver into IR RX port of matrix unit (280564); place receiver at or near corresponding display.
The 280564 has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the 280564 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement.