Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vanco HDBaseT Lite
Summary of Contents for Vanco HDBaseT Lite
- Page 1 Vanco Powered by WyreStorm 8x8 HDBaseT Lite Matrix Part Number VPW-280771 8 Input 8 Output single cable matrix with 2 way IR control Instruction Manual Thank you for choosing this product. Please read these instructions carefully before installing to avoid complications later.
-
Page 2: Table Of Contents
Rear Panel Description such a high specification or indeed, a premium price tag. Typical Application HDBaseT Lite shares many of the same strengths as full HDBT, such as a ‘one-cable’ distribution method, the same Connection signal stability and resistance to interference, but it removes... -
Page 3: Features
• Each Output port can be fed to multiple displays (cascaded). specified distance range of product, no electrical interference, the use of straight cable runs with no bends • Enables up to 4 HDMI video/audio devices to be independently or kinks and no patch panels or wall outlets used. Please switched through up to 4 HDMI displays or projectors for be advised that the presence of any of these factors in uncompressed digital distribution. -
Page 4: Package Contents
HDMI to HDMI coupl e r RP- HDMI t o HDMI coupl e r RP- Maxi m um Si n gl e Li n k Range 1080p Deep Col o ur Maxi m um Si n gl e Li n k Range 1080p Deep Col o ur Maxi m um Si n gl e Li n k Range 1080p Deep Col o ur HD-HD. -
Page 5: Front Panel Description
Front Panel LED Input/Output Select Screen Output Select Buttons (Left/Right) IR Receive Window Enter Selection Buttons Input Select Buttons (UP/DOWN) Rack Brackets ENTER Rear Panel HDBT Output ports (RJ45 Cat5e/6/7) RS485 port Duplicate HDMI Output ports (mirrors HDBT Outputs) LAN port HDMI Input ports RJ45 to RS485 definition indicator IR Receiver port (IR RX) -
Page 6: Typical Application
Output 07 Cable/Satellite 70m/230ft PS3/Xbox RX-1UTP-IR-70 Mirror of 08 Output 08 70m/230ft Cat 5e/6 cable performance HDBaseT Lite range 1080p MX0606-PP / MX0808-PP with RX-1UTP-IR70 display receiver 16ft 32ft 49ft 65ft 82ft 98ft 114ft 131ft 147ft 164ft 196ft 229ft 262ft... -
Page 7: Connection
Connection Connection Connection Connection Connection 9. Connection HDMI Source HDMI Source HDMI Source HDMI Source HDMI Source IRTX Emitter IRTX Emitter IRTX Emitter IRTX Emitter IRTX Emitter IRRX Receiver IRRX Receiver IRRX Receiver IRRX Receiver IRRX Receiver optional optional optional optional optional HDMI... -
Page 8: Basic Operation
using Cat5e as standard, we suggest using Cat6 as the first functions to fail. the preferred cable due to its improved transmission capabilities. If you do not have IR control: • Check your cables are straight with jacks firmly If using a Duplicate display mirrored to the HDBT Output, connected to ports. -
Page 9: Remote Control At The Display End (Remote Ir)
Basic Remote Control INPUT SELECT 11. Basic Remote Control 11. Basic Remote Control System Code Switch System Code Switch OUTPUT OUTPUT INPUT SELECT CHANNEL INPUT SELECT CHANNEL The default system setting is 0x00 to control one matrix, but As such, the function of the handset buttons and The default system setting is 0x00 to control one matrix, but pressing the SYSTEM CODE button on the handset THREE OUTPUT... - Page 10 IR control extender of multiple HDMI signals to multiple HDMI receivers A key feature on our HDBaseT Lite Matrix range is discrete IR signals through the IR call-back system to the matrix Single Cat5e/6/7...
-
Page 11: Ir Extender Control
As with the IR TX, the IR RX ports are allocated to their respective UTP OUTPUT ports (Output1-RX1, Output2 As with the IR TX, the IR RX ports are allocated to -RX2) with the IR signal converted to HDMI and carried As with the IR TX, the IR RX ports are allocated to their their respective UTP OUTPUT ports (Output1-RX1, along the single Cat5e/6/7 cable. -
Page 12: Advanced Remote Control
Advanced Operation Advanced Remote Control Controlling the MX0606/0808-PP using RS232 and COMCTL PC Software 11. Advanced Remote 12. Advanced Operation IR Call Back and Third Party Control systems Control Typically, unless alternative methods of controlling Please note: Due to the differing method of control the matrix are chosen or problems with device Controlling the MX0606/0808-PP using RS232 and based on location, if you are using a third party... - Page 13 MX-0606-PP MX0606-PP MX0606-PP MX-0808-PP 10 11 10 11 10 11 10 11 10 11 10 11 Receive Message Window Receive Message Window Matrix Status Matrix Status Message Clear Message Clear Com Connect State - Shows if the matrix is connected Com Connect State - Shows if the matrix is connected Send Message Window Send Message Window...
- Page 14 A large yellow number denotes each OUTPUT section button again to Connect and power-cyle the matrix with INPUTS chosen by either clicking the left/right arrow (turn off and on). buttons to scroll through inputs numerically or by pressing the input numbers below. Updates are now active and the MX0606/0808-PP The INPUT/OUTPUT switch allows output port selection firmware is now updated.
- Page 15 FACTORY RESET – restores all matrix settings to factory FACTORY RESET – restores all matrix settings to factory default. This action cannot not be reversed. default. This action cannot not be reversed. Set IP The matrix can also be controlled over LAN. Selecting will instruct matrix to attempt to aid transmission of the Set IP The matrix can also be controlled over LAN.
- Page 16 1- Press to instruct COM CTL to read the IR code from the control If the c system. The resulting data will appear in the central section. to instruct COM CTL to read the IR code from the control Receives the specific IR code used to operate the Matrix via 2- Use your cursor to click into the box containing the IR The resulting code appears in the wait to modify state s...
-
Page 17: Read Status Command
Type “Cir” - followed by a “space” - then the “code Input 1 Intput 2 Intput 3 Intput 4 Intput 5 Intput 6 Intput 7 Intput 8 number” – and hit the ”enter” key. For example Cir 39 + ”enter” (equals a hex code of 63 69 EDID Set EDID Set If the control command is sent successfully, the current... -
Page 18: Netctl - Lan Control
Once completed, the EDID appears here. NETCTL - LAN Control The matrix can also be controlled via LAN over a network/ Then select your INPUT port and press web browser using the supplied Wyrestorm NET CTL “Download” to send the EDID to your input software or LAN protocols from third party companies, such as Control 4. - Page 19 to attach the IP address to the system and the IP address will change to a default factory serial number MX0606-PP or MX0606_HE1 / MX0808-PP or MX0808_HE1 Device Name Missing image Should you wish to change the name of your matrix from the Enter the default password of ten zeros Enter the default password of ten zeros factory default, just right click on the serial number and select...
-
Page 20: Edid Dip Switch Settings
The layout of NET CTL includes an upper section to allocate input sources to output with the selection displayed on the left hand click to confirm IP settings side. ATTENTION This ‘Assign IP’ process differs from the COM EDID DIP Switch settings Operation is the same as COM CTL –... - Page 21 turn on for EDID settings to take effect. 1 2 3 4 1 2 3 4 1 2 3 4 DEFAULT 1 2 3 4 DEFAULT 1 2 3 4 1 2 3 4 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4...
-
Page 22: Troubleshooting
3) Distance – Is your cable too long for the signal to be Troubleshooting transmitted effectively? HDBT Lite allows transmission of 1080p up to 70m (229ft) so make sure you cable distance matches your requirements and is well within the Generally, the majority of HD distribution installation maximum transmission distance of the signal. - Page 23 easier than component or coax cable. Furthermore, selections assigned to specific zones in the set up so lead quality varies dramatically, particularly in lower price check the speakers used are fully connected to the brackets. Swap your HDMI leads and check operation – amplifier and correctly assigned within the system set up.
- Page 24 Can I use a single Cat 5e cable? a signal being sent. Replace batteries if flashing is not seen on the digital camera screen. Although conventional transmission is considered to be two Cat 5e cables, it is possible to send the signal down 4) IR dropout issues can be due to exterior influences a single cable if necessary.
-
Page 25: Maintenance
Do I need to use 1 or 2 cables? I can get 1080i but not 1080p at a TV location Using our conventional pro (TMDS) transmission method the Video & Audio is sent along cable #2, IR and Firstly ensure that both the source is outputting 1080p HDCP data is sent along cable #1. -
Page 26: Mail In Service
Mail-in-service Warranty Limits and Exclusions When shipping the unit, carefully pack and send it prepaid, with adequate insurance and preferably in the 1. This Limited Warranty ONLY COVERS failures due original packaging. Please include a document or letter to defects in materials or workmanship and DOES detailing the reason for return and include a daytime NOT COVER normal wear and tear or cosmetic telephone number and/or email address where you can... -
Page 27: Reference Logs
19. Reference Logs Wyrestorm Matrix INPUT installation reference log INPUT Input Source Location Source Details Source resolution & audio Cable number on settings Number Matrix Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343... - Page 28 Wyrestorm Matrix OUPUT installation reference log OUTPUT Output Output Location Display Details Display Resolution & Audio Cable number on Settings Number Matrix Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343...
- Page 29 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343...
- Page 30 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343...
- Page 31 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343...
- Page 32 www.wyrestorm.com WyreStorm Offices US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 Unit 22, Ergo Business Park, Swindon, Wiltshire, SN3 3JW UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 WyreStorm Technical Support US: +86 6677 0053 UK:- +44 (0) 1793 238 338...
Need help?
Do you have a question about the HDBaseT Lite and is the answer not in the manual?
Questions and answers