Related Manuals for Vanco Evolution EVMX4442
Summary of Contents for Vanco Evolution EVMX4442
- Page 1 4x2 4K2K HDMI® MATRIX SELECTOR SWITCH Vanco Part Number EVMX4442 HDMI® 4x2 4K2K Compact Matrix Selector Switch www.vanco1.com • 800.626.6445...
- Page 2 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
- Page 3 FEATURES INTRODUCTION The Evolution by Vanco HDMI® 4x2 Matrix Selector Switch (EVMX4442) allows 4 HDMI sources to be distributed to up to 2 displays simultaneously. This allows multiple sources to be displayed simultaneously on any display or have a single source duplicated on multiple displays, flexibility for the perfect solution.
-
Page 4: Specifications
SPECIFICATIONS HDCP Compliance ............Yes Video Bandwidth ............Single-link 297 Mhz [2.97 Gbps] Video Support ............480i/480p/720p/1080i/1080p @60/2160p @30 48-bit color Audio Support ............Surround Sound (up to 7.1 ch) or stereo digital audio and L-PCM at up to 192kHz, compressed audio (IEC 61937), DSD, DST, DTS and HBR ESD Protection ............ -
Page 5: Panel Descriptions
PANEL DESCRIPTIONS 1. POWER: On/Off Switch 2. Power LED: Illuminates on when power is on 3. IR Blaster (1-4): Infrared 3.5mm socket for plugging in the extension cable of IR blaster 4. Output A: Input selection for Output A 5. Output B: Input selection for Output B 6. - Page 6 EDID The EDID switch allows for EDID learning or to pre-set an EDID to encourage a “handshake” between the display and source. The EDID learning function is only necessary whenever any display on the HDMI output port is not outputting audio and video properly.
- Page 7 OPERATION CONTROL - IR REMOTE CONTROL OUTPUT A: Pressing the 1\2\3\4 buttons will select input source to HDMI OUTPUT A, the LED will indicate the corresponding input source. OUTPUT B: Pressing the 1\2\3\4 buttons will select input source to HDMI OUTPUT B, the LED will indicate the corresponding input source.
-
Page 8: Connect And Operate
CONNECT AND OPERATE IR Transmitter IR Receiver 1. Connect up to 4 sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI inputs on the unit. 2. Connect the output HDMI ports, starting with output 1, to high-definition displays such as an HDTV or HD projector that has HDMI inputs. - Page 9 IR BLASTER Plug IR Blaster into IR TX port of matrix unit (EVMX4442); place blaster in front of the IR eye of the corresponding source. IR RECEIVER Plug IR Receiver into IR RX port of matrix unit (EVMX4442); place receiver at or near corresponding display. 800.626.6445...
-
Page 10: Troubleshooting
HDMI cable into it’s output, then power up the Vanco unit and plug the HDMI cable into it’s input, finally turn on the display and plug the HDMI cable from the receiver into it. This activates all of the devices in corresponding order and results in a signal being plugged into a device that is on and will attempt to connect the signal. -
Page 11: Limited Warranty
Vanco’s opinion, prove defective within this warranty period, Vanco, at its option, will repair or replace this product without charge. Any defective parts replaced become the property of Vanco. This warranty does not apply to those products which have been damaged due to accident, unauthorized alterations, improper repair, modifications, inadequate maintenance and care, or use in any manner for which the product was not originally intended. - Page 12 ® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...