Related Manuals for Vanco Evolution EVMX4K42
Summary of Contents for Vanco Evolution EVMX4K42
- Page 1 HDMI® 4K 4x2 M A T R I X with Downscaling and ARC HDMI® 4K 4x2 Matrix with Downscaling and Part Number: EVMX4K42 www.vanco1.com • 800.626.6445...
- Page 2 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
-
Page 3: Package Contents
FEATURES INTRODUCTION The Evolution by Vanco EVMX4K42 4x2 Matrix with IR, ARC, automatic switching, and downscaling ability, allows 4 HDMI sources to be distributed to up to 2 displays simultaneously. Have multiple sources displayed simultaneously on any display or have a single source split to multiple displays, flexibility for the perfect solution. The EVMX4K42 is capable of transmitting 4K@60Hz, 4:4:4 Chroma Subsampling, and HDR. -
Page 4: Specifications
SPECIFICATIONS HDMI Compliance ............HDMI 2.0 HDCP Compliance ............HDCP 2.2 and HDCP 1.4 Video Bandwidth ............18 Gbps Video Resolution ............Up to 4K2K@50/60Hz (YCbCr 4:4:4), 4Kx2K@30Hz Color Space .............. RGB, YCbCr 4:4:4 ,YCbCr 4:2:2, YCbCr 4:2:0 Color Depth ............... 8-bit, 10-bit, 12-bit [1080P, 4K@30Hz, 4K@60Hz (YCbcr 4:2:0)];... -
Page 5: Panel Descriptions
PANEL DESCRIPTIONS Front Panel 1. Power LED – Illuminates when the matrix unit is powered on 2. IR Sensor – Receives IR signal from included IR remote 3. Input selection buttons for Output A – Switches sources from 1-4 a. Press and hold button to activate Auto Switching 4. -
Page 6: Rear Panel
Rear Panel HDMI Inputs – Inputs 1-4, connect source(s) HDMI Outputs – Outputs 1-2, connect display(s) Audio Breakouts: a. Digital Audio is an optical/SPDIF connection b. Analog Audio is a 3.5mm connection EDID a. AUTO – Selecting AUTO will automatically send EDID info to both outputs from whichever source is selected for both outputs, switch all sources to both outputs for automatic EDID learning b. - Page 7 IR REMOTE Powers on the matrix switcher/Powers off the matrix switcher (goes into standby mode) 1/2/3/4 Selects the input (source) for either Output A or B Selects the input (source) left and right, sequentially, for either Output A or B AUTO Activates auto switching.
-
Page 8: Connection Diagram
Connection Diagram Connection Diagram Source Amplifier HDTV Connect up to 4 sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI inputs on the unit Connect up to 2 displays such as an HDTV, Projector, etc. to the HDMI outputs on the unit OPTIONAL: Connect third party audio systems via Digital Optical/SPDIF or Analog 3.5mm audio outputs (ARC enabled will only output Digital Optical port) Connect the included DC 12V/1A locking power supply... -
Page 9: Auto Switching
Auto Switching The EVMX4K42 features the ability to auto switch sources. To activate this feature, simply press and hold the OUT A/OUT B button on the front panel (or IR remote) until “AUTO” is illuminated. To deactivate, it is the same process until “AUTO”... - Page 10 IR remote can reach it, notice the IR sensor is on the front panel. Need to hide the EVMX4K42? No problem, Vanco has many IR solutions that will repeat and extend IR signals so the matrix switcher can be hidden from plain site. Simply visit www.vanco1.com to see our IR distribution products.
-
Page 11: Limited Warranty
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement. - Page 12 ® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...
Need help?
Do you have a question about the Evolution EVMX4K42 and is the answer not in the manual?
Questions and answers