Daikin Altherma EHFH03S18D 3V Series Installer's Reference Manual page 213

6/8
Field settings table
Breadcrumb Field code Setting name
A.8 [6-0E] What is the maximum temperature setpoint?
A.8 [7-00] --
A.8 [7-01] --
A.8 [7-02] How many leaving water temperature zones are there?
A.8 [7-03] --
A.8 [7-04] --
A.8 [7-05] Boiler efficiency
A.8 [8-00] Minimum running time for domestic hot water operation.
A.8 [8-01] Maximum running time for domestic hot water operation.
A.8 [8-02] Anti-recycling time.
A.8 [8-03] --
A.8 [8-04] --
A.8 [8-05] Allow modulation of the LWT to control the room temp?
A.8 [8-06] Leaving water temperature maximum modulation.
A.8 [8-07] What is the desired comfort main LWT in cooling?
A.8 [8-08] What is the desired eco main LWT in cooling?
A.8 [8-09] What is the desired comfort main LWT in heating?
A.8 [8-0A] What is the desired eco main LWT in heating?
A.8 [8-0B] --
A.8 [8-0C] --
A.8 [8-0D] --
A.8 [8-0E] What is the ambient temp for BUH only operation?
A.8 [9-00] What is the maximum desired LWT for main zone in heating?
A.8 [9-01] What is the mimimum desired LWT for main zone in heating?
A.8 [9-02] What is the maximum desired LWT for main zone in cooling?
A.8 [9-03] What is the mimimum desired LWT for main zone in cooling?
A.8 [9-04] Leaving water temperature overshoot temperature.
A.8 [9-05] What is the mimimum desired LWT for add. zone in heating?
A.8 [9-06] What is the maximum desired LWT for add. zone in heating?
A.8 [9-07] What is the mimimum desired LWT for add. zone in cooling?
A.8 [9-08] What is the maximum desired LWT for add. zone in cooling?
A.8 [9-0C] Room temperature hysteresis.
A.8 [9-0D] Pump speed limitation
A.8 [9-0E] Pump speed limitation additional Zone
A.8 [C-00] --
--
A.8 [C-01]
A.8 [C-02] Is an external backup heat source connected?
A.8 [C-03] Bivalent activation temperature.
A.8 [C-04] Bivalent hysteresis temperature.
A.8 [C-05] What is the thermo request contact type for the main zone?
A.8 [C-06] What is the thermo request contact type for the add. zone?
A.8 [C-07] What is the unit control method in space operation?
A.8 [C-08] Which type of external sensor is installed?
A.8 [C-09] What is the required alarm output contact type?
A.8 [C-0A] --
A.8 [C-0C] --
A.8 [C-0D] --
A.8 [C-0E] --
A.8 [D-00] Which heaters are permitted if prefer. kWh rate PS is cut?
A.8 [D-01] Contact type of preferential kWh rate PS installation?
4P596814-1B - 2022.09
Range, step
Default value
R/W 40~60°C, step: 1°C
60°C
0
2
R/W
0: 1 LWT zone
1: 2 LWT zones
2.5
0
R/W 0: Very high
1: High
2: Medium
3: Low
4: Very low
R/W 0~20 min, step: 1 min
1 min
R/W 5~95 min, step: 5 min
30 min
R/W 0~10 hour, step: 0,5 hour
0,5 hour
50
95
R/W 0: No
1: Yes
R/W 0~10°C, step: 1°C
5°C
R/W [9-03]~[9-02], step: 1°C
18°C
R/W [9-03]~[9-02], step: 1°C
20°C
R/W [9-01]~[9-00]°C, step: 1°C
35°C
R/W [9-01]~[9-00]°C, step: 1°C
33°C
13
10
16
R/W -15~25°C, step: 1°C
-7°C
R/W 37~60°C, step: 1°C
55°C
R/W 15~37°C, step: 1°C
25°C
R/W 18~22°C, step: 1°C
22°C
R/W 5~18°C, step: 1°C
5°C
R/W 1~4°C, step: 1°C
1°C
R/W 15~37°C, step: 1°C
25°C
R/W 37~55, step: 1°C
55°C
R/W 5~18°C, step: 1°C
5°C
R/W 18~22°C, step: 1°C
22°C
R/W 1~6°C, step: 0,5°C
1°C
R/W 0~8, step:1
0 : No limitation
1~4 : 50~80%
5~8 : 50~80% during sampling
6
R/W 0~8, step:1
0 : No limitation
1~4 : 50~80%
5~8 : 50~80% during sampling
6
0
0
R/W
0: No
1: Bivalent
R/W -25~25°C, step: 1°C
0°C
R/W 2~10°C, step: 1°C
3°C
R/W 0: -
1: 1 contact
2: 2 contacts
R/W 0: -
1: 1 contact
2: 2 contacts
R/W
0: LWT control
1: Ext RT control
2: RT control
R/W
0: No
1: Outdoor sensor
2: Room sensor
R/W 0: Normally open
1: Normally closed
0
0
0
0
R/W 0: None
1: -
2: BUH only
3: -
R/W 0: No
1: Active open
2: Active closed
3: Safety thermostat
(*1) Only applicable for models where cooling is possible
Installer setting at variance with
default value
Date Value
(*2) EHFH03S18D▲3V▼