Axis P32 Series Manual page 20

AXIS P32 Dome Camera Series
The web interface
Installation
Capture mode
the capture mode, it can affect many other settings, such as view areas and privacy masks.
Mounting position
Power line frequency: To minimize image flicker, select the frequency your region uses. The American regions usually use 60 Hz.
The rest of the world mostly uses 50 Hz. If you're not sure of your region's power line frequency, check with the local authorities.
Rotate: Select the preferred image orientation.
Zoom: Use the slider to adjust the zoom level.
Focus: Use the slider to manually set the focus.
AF: Click to make the camera focus on the selected area. If you don't select an autofocus area, the camera focuses on the
entire scene.
Autofocus area: Click
Reset focus: Click to make the focus return to its original position.
Note
In cold environments, it can take several minutes for the zoom and focus to become available.
Image correction
Important
We recommend you not to use multiple image correction features at the same time, since it can lead to performance issues.
Barrel distortion correction (BDC)
is a lens effect that makes the image appear curved and bent outwards. The condition is seen more clearly when the image is
zoomed out.
Crop : Use the slider to adjust the correction level. A lower level means that the image width is kept at the expense of
image height and resolution. A higher level means that image height and resolution are kept at the expense of image width.
Remove distortion
of image height and resolution. Bloat means that image height and resolution are kept at the expense of image width.
Image stabilization
stabilization in environments where the device is mounted in an exposed location and subject to vibrations due to, for example,
wind or passing traffic.
Focal length
of view, while a lower value leads to a lower magnification and a wider angle of view.
: A capture mode is a preset configuration that defines how the camera captures images. When you change
: The orientation of the image can change depending on how you mount the camera.
to show the autofocus area. This area should include the area of interest.
: Turn on to get a straighter image if it suffers from barrel distortion. Barrel distortion
: Use the slider to adjust the correction level. Pucker means that the image width is kept at the expense
: Turn on to get a smoother and steadier image with less blur. We recommend that you use image
: Use the slider to adjust the focal length. A higher value leads to higher magnification and a narrower angle
20