Encrypting The Password; Enabling Program Verification On Start Up - Epson WF-M4119 Series User Manual

Administrator Information
❏ Panel Snapshot
Display a screen image snapshot that is displayed on the control panel of the device.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 148
&

Encrypting the Password

Password encryption allows you to encrypt confidential information (all passwords, certificate private keys) stored
in the printer.
1. Enter the printer's IP address into a browser to access Web Config.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Product Security tab > Password Encryption
4. Select ON to enable encryption.
5. Click OK.

Enabling Program Verification on Start Up

If you enable the Program Verification feature, the printer performs verification at start up to check if
unauthorized third parties have tampered with the program. If any issues are detected, the printer does not start.
1. Enter the printer's IP address into a browser to access Web Config.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Product Security tab > Program Verification on Start Up
4. Select ON to enable Program Verification on Start Up.
5. Click OK.
> >
Managing the Printer
191
Enabling Program Verification on Start Up