Epson WF-M4119 Series User Manual page 173

Administrator Information
9. Select Start Setup.
Setting the Proxy Server
Set up the proxy server if both of the following are true.
❏ The proxy server is built for Internet connection.
❏ When using a function in which a printer directly connects to the Internet, such as Epson Connect service or
another company's cloud services.
1. Select Settings on the home screen.
When making settings after IP address setting, the Advanced screen is displayed. Go to step 3.
2. Select General Settings > Network Settings > Advanced.
3. Select Proxy Server.
4. Select Use for Proxy Server Settings.
5. Enter the address for the proxy server by IPv4 or FQDN format.
Confirm the value reflected on the previous screen.
6. Enter the port number for the proxy server.
Confirm the value reflected on the previous screen.
7. Select Start Setup.
Connecting to LAN
Connect the printer to the network by Ethernet or Wi-Fi.
Connecting to Ethernet
Connect the printer to the network by using the Ethernet cable, and check the connection.
1. Connect the printer and hub (LAN switch) by Ethernet cable.
2. Select Settings on the home screen.
3. Select General Settings > Network Settings > Connection Check.
The connection diagnosis result is displayed. Confirm the connection is correct.
4. Select Dismiss to finish.
When you select Print Check Report, you can print the diagnosis result. Follow the on-screen instructions to
print it.
Related Information
"Changing the Connection from Wi-Fi to Wired LAN" on page 139
&
>
Connecting the Printer to the Network
173
>
Connecting to the Network from the
...