Scoring Modules; Update - Lincoln Electric 12926 Operator's Manual

VRTEX 360, 360+, TRANSPORT, TRANSPORT+
®
14. The whip & travel screen allows for the modification of technique
parameters relating to the whipping welding technique and travel
speed including (See Figure 70):
• Dime Spacing
• Whip Time
• Puddle Time
• Travel Speed
Figure 70 – Whip & travel screen
15. The weave screen allows for the modification of weaving welding
technique including (See Figure 71):
• Width of Weave
• Weave Timing
• Weave Spacing
Figure 71 – Weave screen

SCORING MODULES

After welding a pass, the user can now see whether each defect/
discontinuity was within acceptable standards (passed) or not (failed).
The acceptable standards implemented in VRTEX are known as
scoring modules. Instructors can enable the scoring module they
would like to use (i.e., AWS D1.1 or ASME). The pass/fail marks will
appear on the LASER screen for relevant passes (scoring modules do
not cover all of the available VRTEX welds).
The SCORING MODULE feature can be used when the user wishes
to have their welding evaluated against the ASME or AWS D1.1
standards. Select the SCORING MODULES icon and use the red
arrows to toggle between scoring based on ASME standards, D1.1
standards, and None.
Figure 72 – Scoring Modules

UPDATE

OVERVIEW
The update screen in the instructor mode allows the user to update
their software or to update specific configuration files from the USB
memory device in the front of the VRTEX. Selecting this brings up two
options (See Figure 73):
• Update Software
• Update Configuration File
Figure 73 – Update
34
OPERATION (INSTRUCTOR MODE)