Inner Liner; Ventilation System - BRP ADVEX User Manual

B. THE HELMET

13. INNER LINER

INSTALLING THE HEAD LINER
1. Insert the frontal plastic strip under the
notches of the other plastic strip
attached to the inner shell.
2. Next, position the head liner inside
the helmet.
3. Then, fasten the 2 snaps on the neck
portion.
WARNING
Never ride when parts of the inner
lining have been removed.
To avoid damage to the inner lining and inner shell, do not hang the
helmet over the mirrors or handlebar grips.
NOTICE

14. VENTILATION SYSTEM

The ADVEX helmet has a two-way adjustable ventilation system. As
needed, you can modulate the air flow:
1. The front vent is adjustable in 2 positions. When the sliding button is in
the highest position, the vent is closed. When the sliding button is lowered,
it switches to fully open.
2. OPEN: The lower vents are adjustable in 3 positions. When placing both
sliding buttons on the « » position, this indicates that the air circulates
freely.
3. CLOSED: When placing both sliding buttons on the « » position, this
indicates that the air does not circulate.
4. MIDDLE: When placing both sliding buttons in the middle position, this
indicates that the lower vents are 50% open.
17