Micrometric Chin Strap - BRP ADVEX User Manual

B. THE HELMET
3. CHIN CURTAIN
INSTALLING THE CHIN CURTAIN
1. Insert the 4 "arrow snaps" of the chin
curtain into their specific housing on the
chin portion.
2. Press one by one on the plastic arrow
snap to be sure each one is engaged in
the chin plastic strip housing as shown.
3. Slide the chin curtain in the rear neck
portion.
4. Align each of the 6 "snaps" with the
triangle on the trim and press one by one
to be sure each one is engaged in the
plastic housing.
WARNING
Do not carry or hold the helmet by the chin curtain. The chin curtain may
come off, causing the helmet to drop.

4. MICROMETRIC CHIN STRAP

The retention system of the ADVEX helmet comes with a ratchet fastener.
This locking system is easy to use and enables you to adjust the chinstrap
perfectly to your head every time you put the helmet on.
ADJUSTING THE CHIN STRAP
The length of the chinstrap is adjusted by increasing or reducing the length
of strap pulled through the metal buckles. Adjust the length of the
chinstrap so that it fits firmly but comfortably under your chin and fix the
end of the strap using the retaining loop with comfort pad.
WARNING
When adjusting the strap, make sure that the helmet cannot be pulled off
in a forward direction with the chinstrap closed.
WARNING
Check the adjustment of the chinstrap length at regular intervals.
7