Sun Visor - BRP ADVEX User Manual

B. THE HELMET
6. FACE SHIELD
INSTALLING THE FACE SHIELD
1. Insert the upper tab of the face shield
into the specific location on the face
shield mechanism.
2. Once the tab is in position, pull the
lever of the face shield mechanism
downwards and slightly push the lower
portion of the face shield to set the
lower tab back in position.
3. Then, release the lever. Make sure
the spring pushes it back to the up
position and check if the visor is
correctly held in place.
4. Repeat steps 1 - 3 for the other side.
For the other side, note that the face shield will be slightly tilted. Make sure
the lower tab of the face shield and the recess are perfectly aligned.
TYPICAL
1
3
TYPICAL 2
5. Once both sides are in position,
press the face shield pivots gently
towards the helmet with
simultaneous closing movement to
ensure proper latching.
6. Make sure that the face shield
mechanism is functioning properly by
closing and opening the face shield
to its maximum extent.

7. SUN VISOR

OPERATION
The sun visor is operated by the lever
positioned on the left side of the helmet,
which makes it easy to use even when
wearing thick gloves.
Moving the lever back lowers the sun
visor, moving it to the front retracts the sun
visor inside the inner helmet shell and
locks it in position.
a
10