Face Shield - BRP ADVEX User Manual

B. THE HELMET

6. FACE SHIELD

Changing the face shield is easy to do without tools. To replace the visor,
it is helpful to place the helmet on a flat surface on soft cloth or on your lap
while seated.
REMOVING THE FACE SHIELD
1. If helmet is equipped with a peak. Make a
quarter turn counterclockwise to unlock the
peak screw.
2. If helmet is equipped with a peak. Pull
perpendicularly on the side of the peak as
shown.
3. If helmet is equipped with a peak.
Repeat steps 1 - 2 for the other side.
4. Move the face shield into the uppermost
locked position.
5. On one side, pull the lever of the face
shield mechanism downward
release the lower tab of the face shield.
6. Move the lower portion of the face
shield pivots upwards until the lower tab
is released from the face shield
mechanism.
7. Then, pull the face shield downward
to release the upper tab from the face
shield mechanism.
8. Repeat steps 5 – 7 for the other side.
to
TYPICAL
2
1
TYPICAL
TYPICAL
9