Inner Liner - BRP EXOME User Manual

B. THE HELMET

10. INNER LINER

The replaceable inner lining of the EXOME helmet is washable and
ensures both an excellent fit and improved ventilation of the helmet.
The dual-density cheek pads have a specific 3D shape to ensure that the
helmet fits comfortably around the cheeks, and the headliner provides an
optimal fit all around the head.
All interior fittings are made entirely of skin-friendly material. The material
used for the cheek pads and head liner has been treated with an
antimicrobial treatment.
When removing the lining, the cheek pads must first be detached before
taking out the headliner pad. When fitting the lining, remember to insert the
headband pad before the cheek pads.
PAD SIZES
Helmet size XS
Cheek pad
35
thickness mm mm
16
Head
Top
mm mm
liner
18
Crown
thickness
mm mm
S M L XL 2XL
30 25 35 35
mm mm mm mm
16 16 16 12
mm mm mm mm
16 16 18 8
mm mm mm mm
REMOVING THE CHEEK PADS
1. With the jaw in the open position,
detach the Velcro
pulling the cheek pad towards the
inside of the helmet.
2. Slide the chinstrap into the cheek
pad notch.
3. Repeat these steps for the other
side.
INSTALLING THE CHEEK PADS
1. Before installing the cheek pads,
3XL
identify the right and the left sides.
30 20
mm
2. Fasten the 2 snaps and attach the
12 12
Velcro TM upper part in position. Make
mm
sure the strap is in position inside the
6 6
mm
cheek pad notch.
3. Repeat these steps for the other
side.
TM and the 2 snaps by
13