Racelogic Perfomance Box Touch V2 Setting Manual page 5

• Daylight Saving: If you enable this setting, the unit will add 1 hr to the local time setting. This setting is disabled
by default.
Note: You cannot change this setting while the unit is moving or logging, if you try and change the setting, a warning
message will appear.
• Leap Seconds: The leap second value is set to '18 s' by default. You can change it if required bu pressing the
corresponding blue button. Use the presented keypad to set your Leap second value.
Notes:
• The Leap Second value was increased to 18 seconds in December 2016 - you can find more information on this
here.
• You cannot change this setting while the unit is moving or logging. If you try to do so anyway, you will see
a warning message.
To save your selected Leap Second value, press
the Confirm button at the bottom right of the screen. If
you want to return to the Time Settings screen without
saving, press the Cancel button at the bottom left of the
screen.
Note: The maximum input value is 99.
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/
UTC Offset Selector Example
User_Guide_%E2%80%93_Performance_Box_Touch_V2/05_Settings_%E2%80%93_Perfomance_Box_Touch_V2
5