Connection To The Power Supply - tams elektronik SD-34 Manual

SD-34 | SD-34.2

4.3. Connection to the power supply

You can supply the decoder and the connected servos and other consumers

either with the digital voltage from the booster circuit, i.e. via the integrated booster of the
digital central unit or a separate booster,

or if you want to relieve the digital circuit, via your own transformer.
7 not in use
8 Power supply / transformer (~)
9 Input DCC signal / central unit
16 not in use
17 Power supply / transformer (~)
18 Input DCC signal / central unit
Power supply via central unit
Power supply via separate transformer
18 | Connections
tams elektronik
Caution:
!
If a component gets too
hot, disconnect
decoder and the power
supply from the mains
immediately.
Possible short circuit!
Check the assembly!
! Caution:
Switch off the control
unit before connecting
the decoder.
!
Caution:
When connecting several
devices to the same
voltage supply, generally
all connections have to
be polarised identically.
Otherwise a short circuit
will occur, possibly
damaging connected
devices.
the