Product Features; Maintenance - HoMedics MCS-512H-EB Manual

PRODUCT FEATURES:

C
D
E
INSTRUCTIONS FOR USE:
1. Attach the massager to almost any chair using the integrated strap
located at the back of the seat. Ensure it is held firmly in place by
adjusting the strap as necessary.
2. Connect the power supply into a 100‑240V AC mains outlet using the
appropriate supplied plug and cable.
3. Once seated, use the control to operate the appliance. Press the q
button & select the desired massage zone to start the massage.
4. Press the q button to stop the massage.
Strapping System
The Massager incorporates a unique strapping system which allows you to
fasten it to almost any chair. Just slip the straps over the seat or chair and
adjust fastening straps to secure. Your massager won't slip or slide away.
Note: Do not use this product for more than 15 mins at a time.
The moving dual massage mechanism on the back always "parks" or
finishes in its lowest position. It will continue to this position after the
power has been turned off. If the electrical supply is interrupted, when
power is restored, the mechanism will "park" or move to its lowest position.
A / POWER q - To turn on the massage functions, press the power
button. the LED indicator will illuminate and you can confirm your
selection. To turn off the massage functions, press the button again.
After use, when the massager is turned OFF, the nodes will continue
to move as they return to their START position for the next use.
During this time, the remote light will flash. Once the nodes have
returned to their START position, they will stop and the remote light
will turn OFF, indicating that the massager is now OFF and ready
for next use.
B / BACK AND SEAT MASSAGE
UPPER - To turn on the Upper massage, press the Upper button
and the massage will begin in Upper back mode. Pressing the
button a second time will turn off the Upper massage.
FULL - To turn on the Full massage, press the Full button and
the massage will begin in full body mode (full back and glutes).
Pressing the button a second time will turn off the Full massage.
B
LOWER - To turn on the Lower massage, Press the Lower button
and the massage will begin in lower model (back and glutes).
Pressing the button a second time will turn off the Lower massage.
Full back Upper back
A
C / SPOT MASSAGE - While the UPPER/FULL/LOWER function
is on, press either spot massage arrow to stop and focus the shiatsu
action in one place.
D / SPEED - To increase the massage speed, press the speed
button to toggle from Low --> Medium --> High --> Low speed.
A light will illuminate to indicate the speed the unit is currently
on. The massage will be gentle on low speed and more intense on
medium or high speed.
E / HEAT
back and seat. For soothing heat, when massage is on, press the
heat button and the corresponding red LED light will illuminate. To
deselect, press the button again and the corresponding LED will turn
off. For your safety, heat cannot be turned on if a massage program
is not selected.
Lower back

MAINTENANCE:

Cleaning
• Unplug the appliance and allow to cool before cleaning.
• Clean only with a soft, slightly damp sponge.
• Never allow water or any other liquids to come into contact with the
appliance.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint
thinner etc to clean.
Storage
Place the appliance in its box or in a safe, dry, cool place. Avoid contact
with sharp edges or pointed objects which might cut or puncture the
fabric surface. To avoid breakage, DO NOT wrap the power cord around the
appliance. DO NOT hang the unit by the cord.
GB
I 2
- This massage cushion is equipped with heat in the