Product Features - HoMedics Modulair SR-CM10 Series Manual

PRODUCT FEATURES:

The modulair™ Controller Module is equipped with our intelligent SMRTflex
chip. This technology gives our controller module the ability to detect which
modulair™ compression wrap it's docked into and perform the programmes
specific to that wrap. This allows you to add on to your system and build a
compression regimen that fits your needs, all while doing it with the same
battery module.
A / POWER q - To turn the massager on/off,
press the power button. The ring around the
power button will illuminate white to indicate
that the unit is on.
NOTE: The massager will begin on mode A and
60% intensity with no heat.
B / BATTERY INDICATOR
indicates the battery level remaining.
• Solid White: 40% - 100% Charge
• Solid Red: 20 - 40% Charge
• Flashing Red: ≤20% Charge
C / HEAT INDICATOR
indicates the intensity of the heat selected.
• Green: Low
• Blue: Medium
• Purple: High
D / HEAT BUTTON
three levels of heat therapy (Low, Medium, and
High), press the heat button to reach the
desired level.
A
F
B
- The colour
- The colour
- To select between
E
E / INTENSITY
button to select your preferred level of pressure.
The intensity level is indicated on the LED screen
to the left of the button.
• 20%
• 40%
• 60%
• 80%
• 100%
F / MODE BUTTON
button to select between the four massage
modes. The mode is indicated on the LED screen
directly above the button.
• (A) Alternating
• (B) Full
• (C) Sequential
• (D) Pulsing
GB I 2
C
D
- Press the intensity
- Press the mode