Product Features - HoMedics Blossom FAC-310-EU Instruction Manual

PRODUCT FEATURES

Large silicone brushes
Power button
Pulsation increase (+) and decrease (-) buttons
Charging
socket
Small silicone brushes
Battery Indicator
LEDs
Charging cable
USB plug
4 GB
I
USING BLOSSOM
Redefine your skin care with the Blossom Facial Cleanser. Designed
with soft silicone nodes and sonic pulsations to massage and
exfoliate your skin with a gentle touch that's perfect for everyday
cleansing. Blossom gently exfoliates dead skin cells, unclogs
pores, and removes dirt and oil. Blossom also enhances your skin's
absorbtion of skincare products such as creams and lotions. The
result is skin that appears visibly brighter and healthier. Blossom is
waterproof for use in the shower.
Getting started
1. Run the device under a tap, shaking off the water droplets.
2. Remove all make-up, dampen your face and apply your
favourite cleanser.
3. To switch on, press and hold the power button for 2 seconds.
The battery indicator LEDs will flash once and the device will
start at pulsation level 5.
4. Blossom has 8 pulsation levels. You can easily adjust the
intensity according to comfort. You can increase and decrease
the intensity by pressing the + and - buttons.
NOTE: When using the device for the first time, you may
experience a slight redness to the skin, especially if you have
not used a similar product before. This is completely normal, the
redness will disappear once your skin is accustomed to using the
device.
5. Cleanse your cheeks and chin using circular movements.
6. Cleanse your forehead with gentle outward circular strokes.
7. Cleanse your nose by gliding the device up and down one side,
then the other.
8. Cleanse the under-eye area with gentle outward strokes. We
recommend reducing the pulsation intensity for this area.
9. To switch off, press and hold the power button for 2 seconds.
10. Rinse your skin thoroughly and lightly pat dry with a towel.
Apply your regular cream or lotion as usual to complete your
routine.