Advertisement
PRODUCT FEATURES:
Removable
pumice stone
to smooth
and soften
rough skin
Splash guard
4
Massage nodes.
MAX fill line
Power switch
INSTRUCTIONS FOR USE:
1.
Ensure that the unit is unplugged before filling with water. Fill with warm water to the MAX fill line located on the
inside of the tub.
2.
CAUTION: DO NOT FILL WATER OVER THE MAX FILL LINE NOTE: The foot spa will not heat cold water.
For a warm water massage, fill the unit with warm water. The foot spa will keep the water warm but it may
gradually cooler than the water temperature originally added.
3.
Place the unit on the floor in front of a chair. It is recommended to place the product on a towel.
4.
Plug the unit into a power supply.
5.
Sit down and place your feet in the spa.
6.
To operate the unit, press the power button on the top of the product.
7.
Enjoy a deep massage by sliding feet back and forth over the stimulating raised massage nodes
on the footspa floor.
8.
To turn off, press the button again to deactivate.
9.
To empty: First, unplug the unit. Tip the unit, allowing water to pour out along the rear corner of the foot spa.
DO NOT pour water over the power button.
NOTE: DO NOT hold or carry the unit by the removable splash guard.
MAINTENANCE:
CLEANING
•
Unplug the appliance and allow to cool before cleaning. Clean only with a soft,
slightly damp sponge.
DO NOT immerse in any liquid to clean.
•
NEVER use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc to clean.
•
•
Periodically straighten cord if it becomes twisted.
STORAGE
Place the appliance in its box or in a safe, dry, cool place.
DO NOT wrap the power cord around the appliance.
DO NOT hang the unit by the cord.
5
Advertisement
