Product Features; Getting Started - HoMedics Blossom Instruction Manual

PRODUCT FEATURES

Small silicone brushes
Power button
Pulsation increase
(+) and decrease (-)
buttons
Charging socket
Charging cable
USB plug
Large silicone brushes
Battery Indicator LEDs
USING BLOSSOM
Cleanse all over with the Blossom Body Cleansing Brush. Designed
with soft silicone nodes and gentle sonic pulsations, treat your
body to an all-round glow from head to toe. Blossom gently
exfoliates dead skin cells, unclogs pores, and removes dirt and oil.
Blossom also enhances your skin's absorbtion of skincare products
such as creams and lotions. The result is skin that appears visibly
brighter and healthier. Blossom is waterproof for use in the shower.

Getting started

1. Run the device under a tap, shaking off the water droplets.
2. Dampen your skin and apply your favourite cleanser.
3. To switch on, press the power button. The battery indicator
LEDs will flash once and the device will start at pulsation level
5.
4. Blossom has 8 pulsation levels. You can increase and decrease
the intensity by pressing the + and - buttons.
5. To enter Pulse Massage mode, press the power button again.
The intensity will alternate continuously between pulsation
levels 2 and 6.
NOTE: When using the device for the first time, you may
experience a slight redness to the skin, especially if you have
not used a similar product before. This is completely normal, the
redness will disappear once your skin is accustomed to using the
device.
6. Press the brush side of the device to your skin and move in an
outward circular motion.
7. From Pulse Massage mode, press the power button once to
switch the device off. From regular pulsation mode, press the
power button once to enter Pulse Massage mode then press
again to switch off.
8. Rinse your skin thoroughly and lightly pat dry with a towel.
Apply your regular cream or lotion as usual to complete your
routine.