Boost Your Bars Preface This user manual describes design, installation, commissioning and maintenance of杻boost consumer mobile signal boosters. Please read user manual carefully before installing and maintaining the boosters The information in this manual is a subject to change without prior notice Booster Model The user manual can be used for the following models:Hi10-EGSM, Hi10-3S-IOT,Hi10-5S-IOT,Hi13-LTE800,Hi13- EGSM,Hi13-DCS,Hi13-3G,Hi13-EW,Hi13-ED,Hi13-3S-IOT,H,13-3SL-IOT,Hi13-5S- IOT,Hi17-EW,Hi17-3S-IOT,Hi17-3SL...
Page 4
1t to your mobile device. Visa versa, the signal produced by your phone is also received by the indoor antenna, amplified by the booster and then sent back to the cell tower through the outdoor antenna Standard Kit of Hiboost Consumer Mobile Signal Booster Name Descnpt1on...
Page 10
ISO status indicates if the booster has enough isolation between the outdoor and indoor antennas in order to avoid loop back o「so-called self-oscillation. HiBoost is equipped with a smart AGC function to avoid interference with mobile networks "ISO" flashing on the LCD display means that ISO function 1s working great and self-osc1llat1on has been...
Boost Your Bars 1. If the signal has not been improved, please check below • The weak downlink signal leads to the low output signal level. Change the direction or position of the outdoor antenna. You may also try replacing the outdoor antenna with a higher gain antenna to increase the incoming signal •...
Failure to use surge protected AC power strip with at least a 1000」oule rating will void your warranty All Hiboost products that are packaged with Hiboost accessory products a 「e intended for use and「esale as a single unit, _...
Need help?
Do you have a question about the Hi10-17 and is the answer not in the manual?
Questions and answers