Page 1
WhatsApp community↑ D8L237HS02 D8L237BS02 As this item contains many parts, please read the installation instruction carefully before installation . Please use tools properly and carefully. If you have any questions about the product and installation, please contact us. service@vabchesofficial.com Our professional after-sales team will serve you online all day.
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware of to slow down and stop when screw is tight.
Board Identification Not actual size LEFT SIDE PANEL RIGHT SIDE PANEL Qty:1 Qty:1 Qty:1 PARTITION FRONT SLAT BACK SLAT Qty:1 Qty:1 Qty:1 REAR LOWER PANEL UPPER LEFT PANEL UPPER RIGHT PANEL Qty:1 Qty:1 Qty:1 3-35...
Page 4
Board Identification Not actual size TOP BACK PANEL FIXED SHELF FIXED SHELF Qty:1 Qty:1 Qty:1 LEFT PARTITION RIGHT PARTITION REAR BAFFLE Qty:1 Qty:1 Qty:1 FRONT BAFFLE COSMETIC MIRROR SUPPORT PLATE Qty:1 Qty:1 Qty:1 4-35...
Page 5
Board Identification Not actual size TABLE REAR PANEL UPPER RIGHT BACK PANEL LEFT DRAWER FRONT Qty:1 Qty:1 Qty:1 DRAWER FRONT DRAWER LEFT PANEL DRAWER RIGHT PANEL Qty:1 Qty:2 Qty:2 DRAWER BACK PANEL DRAWER BOTTOM LEFT LOWER FRAME Qty:2 Qty:2 Qty:1 5-35...
Page 6
Board Identification Not actual size RIGHT LOWER FRAME RAIL RAIL Qty:1 Qty:1 Qty:1 MIRROR SUPPORT TUBE SIDE FRAME OF STOOL RAIL Qty:1 Qty:2 Qty:2 RAIL SPONGE CUSHION Qty:1 Qty:1 6-35...
Page 7
Board Identification Not actual size 7-35...
Page 9
Part List Ø21mm 4X65mm 350mm 350mm 19CL 19CR PERFECT STICKERS HEX KEY LEFT CABINET MEMBER RIGHT CABINET MEMBER spare:2 350mm 350mm 62X15X22mm Ø15XH18mm 19DL 19DR LEFT DRAWER RUNNER RIGHT DRAWER RUNNER METAL FIXING RING PLASTIC SHEATH Ø3X12mm X1 set TIPPING RESTRAINT PLUG BOARD SCREW HARDWARE KIT...
Page 15
STEP6 M6X25mm Ø15XH18mm Before you install this screw, please make sure the screw size is M6*25mm M6X25mm Before you install this screw, please make sure the screw size is M6*25mm M6X25mm Please tighten the screws to 80% first, and tighten all screws 100% after all parts are assembled.
Page 25
STEP16 Ø6.3X50mm M6X12mm M6X40mm 4X65mm Before you install this screw, please make sure the screw size is M6*40mm M6X40mm M6X12mm Please tighten the screws to 80% first, and tighten Before you install this screw, please all screws 100% after all parts are assembled.
Page 26
STEP17 M6X12mm 4X65mm Before you install this screw, please make sure the screw size is M6*12mm M6X12mm Please tighten the screws to 80% first, and tighten all screws 100% after all parts are assembled. Proper orientation of CAM LOCK 26-35...
Page 27
STEP18 Ø15X9.5mm Proper orientation of CAM LOCK 27-35...
Page 28
STEP19 Ø15X9.5mm Ø6X30mm THIS STEP REQUIRES 2 PEOPLE Proper orientation of CAM LOCK 28-35...
Page 30
STEP21 Ø3X14mm X1 set 90° First, thread the power socket cable through the threading hole 90° of part (S), and then lock the screw (12) Before attaching the back panel, be sure that the unit is at 90°. 30-35...
Page 31
STEP22 M6X25mm 62X15X22mm THIS STEP REQUIRES 2 PEOPLE Opening forward NOTES:The metal ring covers the plastic sheathNOTES:The metal ring covers the plastic sheath , The opening of the plastic sheath faces forward . M6X25mm Before you install this screw, please make sure the screw size is M6*25mm Please tighten the screws to 80% first, and tighten...
Page 32
STEP23 M6X12mm M6X35mm 4X65mm M6X35mm Before you install this screw, please make sure the screw size is M6*35mm M6X12mm Before you install this screw, please make sure the screw size is M6*12mm M6X35mm Please tighten the screws to 80% first, and tighten all screws 100% after all parts are assembled.
Page 33
STEP24 M4X18mm 107X10X21mm Ø4X14mm 109X99X38.5mm You can install the hair dryer rack(15) on the left or right according to your needs Cabinet Slide Drawer Slide 33-35...
STEP25 When making upcan use the switch to turn on or off the light. the dressing table brings you 3temperature light modes, touch the button you can easy light up the mirror and changeet your different needs, long press to adjust the brightness TOUCH SWITCH 34-35...
Page 35
STEP26 NOTE :The tipping restraint hardware included is for wooden stud wall construction. It must be attached to a wall stud. Depending upon your wall construction different We have included a set of tipping restraint hardware for anchor hardware maybe required. Please contact your local this unit.