Page 1
D3M563BS0M As this item contains many parts, please read the installation instruction carefully before installation . Please use tools properly and carefully. If you have any questions about the product and installation, please contact us. service@vabchesofficial.com Our professional after-sales team will serve you online all day.
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware of to slow down and stop when screw is tight.
Board Identification Not actual size DESK TOP LEFT SIDE PANEL RIGHT SIDE PANEL Qty:1 Qty:1 Qty:1 PARTITION FRONT CROSS MEMBER REAR CROSS MEMBER Qty:1 Qty:1 Qty:1 REAR LOWER PANEL TEMPERED GLASS DRESSING MIRROR Qty:1 Qty:1 Qty:1 3-38...
Page 4
Board Identification Not actual size FIXED SHELF LEFT DRAWER FRONT UPPER BACK PANEL Qty:1 Qty:1 Qty:1 LEFT DRAWER SIDE RIGHT DRAWER SIDE DRAWER BACK Qty:1 Qty:1 Qty:1 LEFT DRAWER BOTTOM STOOL PANEL LOWER LEFT FRAME Qty:1 Qty:1 Qty:1 4-38...
Page 5
Board Identification Not actual size LOWER RIGHT FRAME BACK PANEL UPPER FRAME Qty:1 Qty:1 Qty:2 RIGHT DRAWER FRONT RAIL RAIL Qty:1 Qty:1 Qty:1 SIDE FRAME OF STOOL RAIL RAIL Qty:2 Qty:2 Qty:1 5-38...
Page 6
Board Identification LEFT DRAWER SIDE RIGHT DRAWER SIDE DRAWER BACK Qty:1 Qty:1 Qty:1 DRAWER PARTITION DRAWER PARTITION RIGHT DRAWER BOTTOM Qty:2 Qty:1 Qty:1 6-38...
Page 7
Board Identification Not actual size 7-38...
Page 9
Part List (Ø25)M6X25mm Ø35mm GROMMET PLUG BOARD THE POWER PLUG LEVELER 14" 14" 14" 350mm 350mm 350mm 22CL 22CR 22DL HAIR DRYER RACK LEFT CABINET MEMBER RIGHT CABINET MEMBER LEFT DRAWER RUNNER 14" 350mm 4X65mm 22DR X1 set HEX KEY RIGHT DRAWER RUNNER ANTI-TIPPING HARDWARE WOODEN DOWEL...
Page 16
STEP7 M6X35mm M6X30mm M6X12mm 4X65mm M6X35mm Before you install this screw, please make sure the screw size is M6*35mm M6X12mm Before you install this screw, please make sure the screw size is M6*12mm M6X30mm Please tighten the screws to 80% first, and tighten all screws 100% after all parts are assembled.
Page 19
STEP10 M6X25mm Ø6.3X50mm 35mm 4X65mm M6X25mm Before you install this screw, please make sure the screw size is M6*25mm 19-38...
Page 20
STEP11 M6X25mm Ø6X30mm 4X65mm M6X25mm Before you install this screw, please make sure the screw size is M6*25mm 20-38...
Page 21
STEP12 M6X30mm 4X65mm Before you install this screw, please make sure the screw size is M6*30mm M6X30mm M6X30mm Please tighten the screws to 80% first, and tighten all screws 100% after all parts are assembled. Before you install this screw, please make sure the screw size is M6*30mm 21-38...
Page 29
STEP20 M6X40mm Ø6.3X50mm M6X12mm Ø4X65mm THIS STEP REQUIRES 2 PEOPLE Before you install this screw, please make sure the screw size is M6*40mm M6X40mm M6X12mm Please tighten the screws to 80% first, and tighten Before you install this screw, please all screws 100% after all parts are assembled.
Page 31
STEP22 Ø6X35mm Ø15X9.5mm 4X65mm THIS STEP REQUIRES 2 PEOPLE M6X35mm Before you install this screw, please make sure the screw size is M6*35mm Rotating Proper orientation of CAM LOCK 31-38...
Page 32
STEP23 Ø15X9.5mm Proper orientation of CAM LOCK 32-38...
Page 33
STEP24 Ø3.5X14mm Ø3X14mm X1 set Before attaching the back panel, be sure that the unit is at 90°. 33-38...
Page 34
STEP25 Ø4X12mm Ø3X12mm You can install the hair dryer rack(21) on the left or right according to your needs 34-38...
STEP28 When making upcan use the switch to turn on or off the light. the dressing table brings you 3temperature light modes, touch the button you can easy light up the mirror and changeet your different needs, long press to adjust the brightness Note: Please tear off the protective film on the...
Page 38
STEP29 NOTE :The tipping restraint hardware included is for wooden stud wall construction. It must be attached to a wall stud. Depending upon your wall construction different We have included a set of tipping restraint hardware for anchor hardware maybe required. Please contact your local this unit.