Page 1
D3M555 As this item contains many parts, please read the installation instruction carefully before installation and complete the installation with the cooperation of your partner. Please use tools properly and carefully. If you have any questions about the product and installation, please contact us.
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware of to slow down and stop when screw is tight.
Board Identification Not actual size LEFT SIDE PANEL RIGHT SIDE PANEL Qty:1 Qty:1 Qty:1 MIDDLE PANEL DRESSING MIRROR UPPER BACKPANEL Qty:1 Qty:1 Qty:1 UPPER RIGHT SIDE PANEL FIXED SHELF DOOR Qty:1 Qty:2 Qty:1 3-36...
Page 4
Board Identification Not actual size BOTTOM ADJUSTABLE PLATE BOTTOM APRON Qty:1 Qty:1 Qty:1 RIGHT BACK RAIL LEFT FRONT RAIL LEFT BACK RAIL Qty:1 Qty:1 Qty:1 RIGHT BACK PANEL DRAWER BOTTOM STOOL SIDE PANEL Qty:1 Qty:1 Qty:2 4-36...
Page 5
Board Identification Not actual size STOOL FRONT APRON STOOL BOTTOM BOARD SPONGE CUSHION Qty:1 Qty:1 Qty:1 DRAWER FRONT STOOL BACK APRON DRAWER LEFT PANEL Qty:1 Qty:1 Qty:1 DRAWER RIGHT PANEL DRAWER BACK PANEL Qty:1 Qty:1 5-36...
Page 6
Board Identification Not actual size 6-36...
Page 30
STEP22 To adjust the vertical height. Loosen the four screws "A" on both hinges. Two of them are usually in slotted holes which allows you to adjust up or down by a few mm. Then tighten back up. To adjust depth. Loosen screw "B"...
Page 33
STEP25 For specific installation and debugging, please read the last two pages X1 set PEFOAM ABS lamp holder Switch regulator USB power adapter 33-36...
Page 34
STEP26 NOTE :The tipping restraint hardware included is for wooden stud wall construction. It must be attached to a wall stud. Depending upon your wall construction different We have included a set of tipping restraint hardware for anchor hardware maybe required. Please contact your local this unit.
Page 35
Thank you for purchasing our company s DIY makeup mirror fill Vanity Mirror Lights Light products, this product supports DIY own home mirror, instantly make their own mirror into a modern fashion makeup with LED Fill mirror.Even more interesting is that you can adjust the color temperature by yourself ! The color temperature is adjustable Product Features:...
Page 36
Use the installation details see inside pages. Functional Description: Install reference diagram: Brightness+ PC lamp cover Output Switch button Adjust the color temperature Special feature: Brightness- Rotate the bulbs clockwise or anticlockwise, the ball bubble spacing becomes shorter, the connection input line shrinks and hides in the ball bubble bottom cover;...