Sinclair SDV6 SCC-61 User And Installation Manual page 96

2.6.5 Advanced settings
Reboot the system
Restore factory settings
Machine code
Emergency stop
activated or not
Emergency stop closure,
disconnect trigger
Restore the operating
status before the
emergency stop
*1: Emergency stop function: After the centralized controller receives the emergency stop signal, it
will send a shutdown command to all IDUs that are powered on, and enter the "emergency stop
monitoring" state. It will judge whether there are any powered-on IDUs every 60s. If any powered-on
IDUs are found, the centralized controller will send a shutdown command to relevant IDUs.
Click "Reboot the system" to restart the centralized controller.
Click "Now" to clear the centralized controller data and restore
factory settings. The system restarts.
Provide the QR code to the technical engineer of the dealer, and
enter the activation code provided by the technical engineer in
the text box.
Click "Activate" to enable the electricity report function.
Select "Enable" to enable the function or "Stop" to disable the
function (*1).
Select "close" to enable the function or "disconnect" to disable the
function.
If you select "No", the operating status before activating emergency
stop is not restored after you release the emergency stop function.
The system is off. If you select "Yes", the operating status before
activating emergency stop is restored after you release the
emergency stop function.
95
Activate