Modification Of Device Name - Sinclair SDV6 SCC-61 User And Installation Manual

Click the parameter information to be modified ("Unit name", "Fan(W)", "EH(W)"), and finally click
to save.
* Causes for the failure of the centralized controller to locate the device.
1. The preconditions of SCC-61 and the "Precautions" at the beginning of this chapter are not met.
Solution: Re-power on the SCC-61 centralized controller. After the preconditions are met, search
for the device again.
2. During power-on of SCC-61, the system address, IDU address and other information of the
refrigerant system have been modified.
Solution: Re-power on the SCC-61 centralized controller. Wait 5 minutes and search for the
device again.
For other matters, please consult relevant technical support personnel.
The following chapters will use examples to describe how to use

1.5 Modification of Device Name

The device name can be modified in two ways.
Mode 1: Modify the device name on the "Device search" interface.
In the "Setting" - "Device search" interface, directly click the cell with a device name that needs to
be modified in the "Unit Name" column, enter the name to be modified, and click
right corner to save the modified information.
Mode 2: Modify the unit name on the "Device monitoring" interface.
1. Click to enter device monitoring, and click "Device".
SCC-61 to manage devices.
13
in the upper