Sinclair SDV6 SCC-61 User And Installation Manual page 67

A schedule supports multiple holiday schedule cards. The system executes the schedule
commands in the "Holiday Template" on the specified date, instead of the schedule commands
in the schedule. As required at the beginning of the example, during the Labor Day holiday, the
system should be powered on at 09:00 instead of 08:00 as planned in the schedule and powered
off at 17:00 instead of 18:00 as planned in the schedule.
Click "Add holiday". A holiday schedule card will appear on the interface. Set the "Start" date to
2022-05-1 and the "End" date to 2022-05-03. For the "Holiday Template", select "5.1 - 5.3".
Note: If no "Holiday template" is available, you can save the schedule. After a "holiday
template" is created, edit the schedule again and add the corresponding holiday template.
Note: If a "Holiday schedule" card is available and the "Holiday template" is selected as "No
template", the schedule will not be executed on the corresponding date.
66