Table Of Contents - Konica Minolta bizhub C220 Setup Instructions

Topic
A. Administrative Requirements Prior to MFP HTTP Setup
B. MFP Specific Requirements
C. Setting MFP Date/Time Settings
D. Configuring MFP for One-Way (HTTP) Communication
E. Heart Beat Setting
F. Setting vCare Date/Time Settings
G. Setting the Notification Schedule and Center Notification
H. Configuring WebDAV Settings
I. First Call to the vCare System
J. Printing a vCare Communication Log
Purpose: This documentation is for setting up bizhub C220 / C280 /C360
vCare/CSRC One-way (Simplex) HTTP communication..
Convention: bizhub vCare is the US brand used by KMBS for Konica Minolta's
worldwide CS Remote Care System (CSRC).
Overview: The settings entered into the CS Remote Care section of the bizhub are
intended to do the following:
Set the MFP with the current date, time and time zone according to Military Time.
When the MFP communicates with the vCare/CSRC host, the MFP will report the
date and time for its specific location.
Set a unique identification code for communicating to a specific vCare/CSRC host
system.
Set a unique HTTP connection for the MFP, as well as the IP addresses/ Link
information of the WEB/DAV server. All passwords, user names and port settings for
HTTP will be set to allow the MFP to communicate with the WEB/DAV server(s)
supporting vCare/CSRC
Contents
Konica Minolta bizhub C220/C280/C360
bizhub vCare HTTP Setup Guide
Page 1 of 14
Page
2
2
2
3
6
6
7
9
12
13