Sharp BP-1200S Optional Units Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Printer
  5. BP-1200S
  6. Optional units manual
Sharp BP-1200S Optional Units Manual

Sharp BP-1200S Optional Units Manual

Digital full color production printer
Hide thumbs Also See for BP-1200S:
Table of Contents

Advertisement

Quick Links

Download this manual
Digital Full Color
Production Printer
BP-1200S/BP-1200C
Optional Units Manual
1
High Capacity Feeder ................................................. 3
2
Air Suction Feeder .................................................... 24
3
Interface Decurler Module ....................................... 35
4
Inserter ..................................................................... 39
5
Static Eliminator ....................................................... 44
6
High Capacity Stacker .............................................. 47
7
Crease / Two-Sided Trimmer.................................... 55
8
Folder Unit ................................................................ 64
9
Finisher ..................................................................... 67
10
Square Back Fold Trimmer ....................................... 82
Sharp Corporation

Advertisement

Table of Contents
loading

Related Manuals for Sharp BP-1200S

Summary of Contents for Sharp BP-1200S

  • Page 1 Digital Full Color Production Printer BP-1200S/BP-1200C Optional Units Manual High Capacity Feeder ..........3 Air Suction Feeder ............ 24 Interface Decurler Module ........35 Inserter ..............39 Static Eliminator ............44 High Capacity Stacker ..........47 Crease / Two-Sided Trimmer........55 Folder Unit ..............
  • Page 2 Preface A manual describing the operations for optional units, such as the Finisher. Refer • Descriptions for the following optional products are provided in different guides. - Offset catch tray, Long catch tray: 'Printer Unit Manual' - Print server and related products: Manual included in the product •...
  • Page 3 High Capacity Feeder Device Components / Caution Labels Component Function Bypass Tray (Paper Tray A1/A2-3) Load paper here. Error Indicator When paper jam occurs, the indicator is turned on. When the priority device indicator (top lamp) blinks, first of all per- form the paper jam operation.
  • Page 4 Main Specifications High Capacity Feeder A3 Item Description Paper size High Capacity Feeder Standard Size: Max SRA3 (320 x 450 mm), 12.6×19.2“ (320 x 488 mm), Min Custom Size: 98 x 148 mm to 330 x 488 mm Bypass Tray Standard Size: Max A3, 11 x 17”, Min A6 Custom Size:...
  • Page 5 Loading Paper Loading to High Capacity Tray Images are printed on the face side of the loaded paper. Important Do not load paper above the maximum fill line. It may cause paper jams or machine malfunction. Note • If the amount of the loaded paper is 100 sheets or less, the guides apply more pressure to the paper. It may cause the paper to be distorted, leading to paper jams.
  • Page 6 Push in the Paper Tray. Postcard Setting Attach Post Card Kit to the Paper Tray to load paper with the width of 98 to 181.9 mm. Note Do no use Post Card Kit (which does not support 98 to 99.9 mm). Using it can cause misregistration or paper jam. Pull out the Paper Tray toward you until it stops.
  • Page 7 Load remaining sheets with the printed side facing up, and align the paper edges in the direction of the arrow ( Adjust the short-side paper guide to the correct pa- per size ( To leave a space, pinch the paper guide grip to move. To narrow, push the paper guide to move.
  • Page 8 Changing Paper Feeding Accuracy Enabling this function may improve print displacement when images are skewed (print position is displaced) even though plain paper with the paper weight of 220 g/m or less is correctly loaded. Note • If this function is enabled when paper other than thick paper and plain paper is used, the machine cannot feed the paper properly, resulting in paper jams.
  • Page 9 Loading to Bypass Tray Images are printed on the face side of the loaded paper. Important Do not load paper above the maximum fill line. It may cause paper jams or machine malfunction. Note • If the paper guide width is narrower or wider than the paper, it may cause paper jams. •...
  • Page 10 Fan the paper well and insert it along the paper guide all the way until it touches the back, with the printed side facing up. Secure the 4 screws of the paper guide. Special Media Setting ■Hole Punched Paper Orientation: Place the holes of paper on the right side when you face the front side of machine. ■Precut Tab Orientation: Place the tabs of paper on the left side when you face the front side of machine.
  • Page 11 ■Loading Paper Loosen the 4 screws of the front paper guide. Hold the center of the front paper guide and adjust it to the size of loaded paper. Fan the paper well and insert it along the front paper guide all the way until it touches the back, with the printed sidefacing up.
  • Page 12 ■Alignment When using long paper with the length of 729 mm or less, auto alignment adjustment can be per- formed by means of Inline Sensor. Note If auto alignment ends abnormally (image skew angle is 5 mm or more), you need to mitigate the image skew by using Individual Settings before proceeding with auto alignment.
  • Page 13 Loosen the 4 screws of the front paper guide. Use the right/left front edge of paper as the pivot point (right front edge if the skew is ori- ented leftward, or left front edge if the skew is oriented rightward) to move the rear edge of paper to the position corresponding to the skew amount.
  • Page 14 Paper Jams Note The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
  • Page 15 ■When Indicator E7 is Turned on Pull out the Paper Tray A1/A2-2 toward you until it stops. Note Confirm that no paper is jammed inside the Right Cover before pulling it out. Remove the jammed paper. Confirm the paper guide position and push in the Paper Tray.
  • Page 16 ■When Indicator E3 is Turned on Open lever [1b] to the right ( 1 ), turn knob [1c] clock- wise ( 2 ), and remove the jammed paper ( 3 ). Return lever [1b]. ■When Indicator E4 is Turned on Open lever [1a] to the right ( 1 ), turn knob [1c] clock- wise ( 2 ), and remove the jammed paper ( 3 ).

  • Page 17: Table Of Contents

    Inside of the Right Cover (Left Side at Continuous Feed Configuration) Open the Right Cover. Remove the jammed paper. When Indicator E1 is Turned on ....................p.17 When Indicator E2 is Turned on ....................p.17 When Indicator E3 is Turned on ....................p.18 When Indicator E4 is Turned on ....................p.18 ■When Indicator E1 is Turned on Open lever [1a] to the right ( 1 ), turn knob [1c] counter-...

  • Page 18: When Indicator E3 Is Turned On

    ■When Indicator E3 is Turned on Open lever [1b] to the right ( 1 ), turn knob [1c] counter- clockwise ( 2 ), and remove the jammed paper ( 3 ). Return lever [1b]. ■When Indicator E4 is Turned on Open lever [1d] downward ( 1 ), turn knob [1c] counter- clockwise ( 2 ), and remove the jammed paper ( 3 ).
  • Page 19 Paper Feeding Unit (Right Side at Continuous Feed Configuration) ■When Indicator E5 is Turned on Pull out the top cover toward you until it stops. Note Confirm that no paper is jammed inside the Right Cover before pull- ing it out. Open lever [2a] to the right ( 1 ), lever [2b] upward ( 2 ), and remove the jammed paper ( 3 ).
  • Page 20 Cleaning Machine • When you clean machine products, use the cleaning materials designated in every step. • To wipe with a wet cloth, use the soft cloth tightly wrung out of water. If the parts are not com- pletely dry, the machine may malfunction. •...
  • Page 21 Wipe the surface of roller 1 with the soft cloth tightly wrung out of water. Reinstall roller 1. Note Make sure that roller 1 is installed in the holder completely. Remove roller 2 by picking up the both ends of its pin. Wipe the surface of roller 2.
  • Page 22 Cleaning the Paper Feeding Unit in the High Capacity Tray Note • Do not press a roller during the cleaning, otherwise the roller may drop off. • Non-woven dry type fabric can be used effectively for cleaning paper dust. Open the Right Cover. Open lever [1a] to the right.
  • Page 23 Open lever [1d] upward. Clean behind lever [1d]. Wipe the roller surface with the soft cloth tightly wrung out of water. Lightly wipe paper dust off on the surface of the paper path. Return lever [1d]. Paper path surface Roller Close the cover.
  • Page 24 Air Suction Feeder Device Components Component Function Bypass Tray (Paper Tray A1/A2-3) Load paper here. Error Indicator When paper jam occurs, the indicator is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. Right Cover Open this cover to clear paper jams.
  • Page 25 Main Specifications Air Suction Feeder A3 / Air Suction Feeder A3 for Banner Description Item Air Suction Feeder A3 Air Suction Feeder A3 + Banner Unit for Air Suction Feeder Paper size Standard size: Max SRA3 (320 x 450 mm), 12.6×19.2“ (320 x 488 mm), Min A6 Custom size: Custom size: 98 x 148 mm to 330 x 488 mm...
  • Page 26 Chained Air Suction Feeder A3 R / Chained Air Suction Feeder A3 L / Chained Air Suction Feeder A3 L for Banner / Banner Unit for Air Suction Feeder Description Chained Air Suction Feeder A3 R Item Chained Air Suction Feeder A3 R + Chained Air Suction Feeder A3 L for Banner + Chained Air Suction Feeder A3 L + Banner Unit for Air Suction Feeder...
  • Page 27 Loading Paper Important Do not load paper above the maximum fill line. It may cause paper jams or machine malfunction. Note • Position the guides correctly to match the paper size. Incorrectly positioned guides may cause misfeeding and paper jams. •...
  • Page 28 Postcard Setting Attach Postcard Kit for Air Suction Feeder to the Paper Tray to load paper with the width of 98 to 181.9 mm. Pull out the Paper Tray toward you until it stops. Remove any paper remaining in the Paper Tray. Remove the shutters.
  • Page 29 Load remaining sheets with the printed side facing up, and align the paper edges in the direction of the arrow ( Adjust the short-side paper guide to the correct pa- per size ( To leave a space, pinch the paper guide grip to move. To narrow, push the paper guide to move.
  • Page 30 Loading to Long Paper Tray Images are printed on the face side of the loaded paper. Note • If the amount of the loaded paper is 100 sheets or less (10 to 20 sheets for 864 mm or more paper), the guides apply more pressure to the paper.
  • Page 31 Load remaining sheets with the printed side facing up, and align the paper edges in the direction of the arrow ( Adjust the short-side paper guide to the correct pa- per size ( To leave a space, pinch the paper guide grip to move. To narrow, push the paper guide to move.
  • Page 32 Pinch the left side long-side paper guide grip and ad- just to the correct paper size ( Place the bottom edge paper guide to fit the loaded paper ( Note The bottom edge guide is removable. Install it in the direction such that the metal surface touches paper.
  • Page 33 Attach the extension tray and the supporting plate. Insert the extension tray and tighten the screws to fix. Insert the supporting plate. When not in use, hang the parts on the holder of the lower part. Turn the lever on the left of the long-side paper guide upward.
  • Page 34 Fan the paper well and load sheets with the printed side facing up, and the paper edges aligned in the di- rection of the arrow ( Pinch the right side long-side paper guide grip and adjust to the correct paper size ( Pinch the left side long-side paper guide grip and ad- just to the correct paper size ( Place the bottom edge paper guide to fit the loaded...
  • Page 35 Interface Decurler Module Device Components Component Function Error Indicator When paper jam occurs, the indicator is turned on. When the indicator blinks, first of all perform the paper jam operation. Curl correction button Press the button to correct paper curl. This curl correction function can be used during printing.
  • Page 36 Curl Correction The curl correction button is used to correct paper curl caused by heat and/or pressure. The curl correction button can be operated regardless of the machine state when the machine is Note • This curl correction function can be used during printing. Fine correction according to the paper properties can be made from Printer User Interface.
  • Page 37 Operations and Functions of Curl Correction Press the AUTO button to enter the [AUTO] mode. Indicator Mode Function AUTO Curl correction is automatically performed. It is recommended to use this mode basically. Optimum curl correction is per- formed according to the paper size and output direction.
  • Page 38 Paper Jams Note The error indicator at the top of the machine is turned on. When the indicator blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
  • Page 39 Inserter Device Components Component Function Error Indicator When paper jam occurs, the indicator is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. Curl correction button Use this button when curl cannot be corrected even if the highest correction (or lowest correction) of Interface Decurler Module is performed.
  • Page 40 Main Specifications Item Description Paper size Standard size: Max SRA3 (320 x 450 mm), 12.6×19.2“ (320 x 488 mm), Min A5 Custom size: 182 x 148 mm to 330 x 488 mm Paper weight 52 to 350 g/m Paper capacity 250 sheets Power supply Supplied from Interface Decurler Module...
  • Page 41 Loading Paper Load paper (blank paper or printed paper) to be used as an interleaf or cover. Inserter Tray is used to load paper used as an interleaf or cover, and print cannot be performed. Note • After removing all the paper from the Tray, and then load the paper again together with the paper you want to add.
  • Page 42 Paper Jams Note The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
  • Page 43 If you have difficulty in removing the papers, open lever [1c] to the right ( 1 ), turn knob [1b] counterclockwise ( 2 ), and remove the jammed paper ( 3 ). Return lever [1c]. Close the cover. ■When Indicator E3 is Turned on Open the Cover.
  • Page 44 Static Eliminator Device Components Component Function Error Indicator When paper jam occurs, the indicator is turned on. When the indicator blinks, first of all perform the paper jam operation. Applied voltage count Set applied voltage according to the media to feed. Set “00”...
  • Page 45 Setting Voltage Enter a value according to the media to use. Humidity Media Standard value Upper limit to 90 Low humidity (15% or less) Surface layer: Resin to 99 Inner layer: Paper to 70 Normal humidity (16 to 55%) Surface layer: Resin to 99 Inner layer: Paper to 60...
  • Page 46 Paper Jams Note The error indicator at the top of the machine is turned on. When the indicator blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
  • Page 47 High Capacity Stacker Device Components Component Function Error Indicator When paper jam occurs, the indicator is turned on. When the priority device indicator (top lamp) blinks, first of all perform the pa- per jam operation. Sample button Press the button to output a sample to the Top Output Tray. Paper eject button Press the button to stop printing and take out outputs.
  • Page 48 Main Specifications Item Description Paper capacity Output Tray 500 sheets High Capacity 5000 sheets Stacker – Stacker Cart Paper size Output Tray Standard size: Max SRA3 (320 x 450 mm), 12.6×19.2“ (320 x 488 mm), Min A6 Custom size: 98 x 148 mm to 330 x 488 mm High Capacity Standard size: Stacker –...
  • Page 49 Outputting Paper Top Output Tray Banner Print Extension Kit Long paper can be loaded without its lead edge sticking out. Paper size (mm) Tray capacity (sheets) Width: 210 to 330.2 Up to 729 mm: 100 Length: 488.1 to 1,200 More than 729.1 mm: 10 Note This value applies if 82 g/m2 paper is used.
  • Page 50 Note As holding the U-shaped bar with a hand, insert the fixing devices firmly, and check that the wires will not come off from the U-shaped bar. Adjust the wire positions according to the size of paper to be output. Note Install the wires in parallel.
  • Page 51 Paper Jams Note The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.

  • Page 52: When Indicator E3 Is Turned On

    ■When Indicator E3 is Turned on Open the front upper cover. Open lever [1b] upward ( 1 ), turn knob [1a] counter- clockwise ( 2 ), and remove the jammed paper ( 3 ). Return lever [1b]. Open lever [2b] upward ( 1 ), turn knob [2c] counter- clockwise ( 2 ), and remove the jammed paper ( 3 ).

  • Page 53: When Indicator E6 Is Turned On

    ■When Indicator E6 is Turned on Press the paper eject button. When lock is released, open the front lower cover. Pull out the stacker cart slowly and remove the jammed paper. Return the stacker cart slowly. Close the cover. ■When Indicator E7 is Turned on Remove the jammed paper that sticks out from the exit of the Top Output Tray.

  • Page 54: When Indicator E8 Is Turned On

    ■When Indicator E8 is Turned on Open the front upper cover. Open lever [3b] upward ( 1 ), turn knob [3a] clockwise ( 2 ), and remove the jammed paper ( 3 ). Return lever [3b]. Close the cover. Check the curl direction of the jammed paper and correct the curl. Refer "Curl Correction"...
  • Page 55 Crease / Two-Sided Trimmer Device Components / Caution Labels Component Function Error Indicator When paper jam occurs, the indicator is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. Waste full indicator When cut pieces need to be disposed, the indicator is turned on.
  • Page 56 Main Specifications Item Description Two-sided Trim Paper size Standard size: Max SRA3 (320 x 450 mm), 12.6×19.2“ (320 x 488 mm), Min A4, Letter Custom size: 194 x 210 mm to 330 x 488 mm Paper weight 52 to 350 g/m Trim dimensions One side: 6 to 25 mm Crease...
  • Page 57 Waste Container When cut pieces need to be disposed, the waste full indicator is turned on. When it is turned on, dispose cut pieces. Note • Cut pieces can be disposed even during printing. • When cut pieces in the waste container become full, the waste full indicator changes from ON to blinking. Open the lower cover.
  • Page 58 Paper Jams Note The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
  • Page 59 ■When Indicator E2 is Turned on Turn knob [2] counterclockwise and align the marks. Open lever [1a] downward ( 1 ) and open lever [1b] downward ( 2 ). Turn knob [1c] clockwise ( 1 ) and remove the jammed paper ( 2 ).

  • Page 60: When Indicator E3 Is Turned On

    ■When Indicator E3 is Turned on Turn knob [2] counterclockwise and align it with the mark position. Open lever [2c] downward ( 1 ) and remove the jammed paper ( 2 ). Note Jammed paper may be hidden at the upper section. Return lever [2c].

  • Page 61: When Indicator E5 Is Turned On

    ■When Indicator E5 is Turned on Open lever [3a] to the right ( 1 ) and open lever [3b] to the left ( 2 ). Turn knob [3c] clockwise ( 1 ) and remove the jammed paper ( 2 ). Turn knob [2f] counterclockwise ( 1 ) and remove the jammed paper ( 2 ).

  • Page 62: When Indicator E7 Is Turned On

    Open lever [4a] to the right ( 1 ), turn knob [2f] counter- clockwise ( 2 ), and remove the jammed paper ( 3 ). Note As holding the lever [4a] with a hand, turn knob [2f] and remove the paper.
  • Page 63 Open lever [3a] to the right ( 1 ) and open lever [3d] to the right ( 2 ). Collect cut pieces around the trimmer unit in the waste container using the waste collecting bar. If cut pieces cannot be collected in the waste container, move them by the waste collecting bar and remove them with hands.
  • Page 64 Folder Unit Device Components / Caution Labels Bottom Component Function Tri-Fold Output Tray Button Press the button to remove paper from the Tri-Fold Output Tray. The Tri-Fold Output Tray is opened when the lamp stops blinking and comes on and the lock is released. Cover Open this cover to clear paper jams.
  • Page 65 Paper Jams Note The error indicator at the top of the Finisher is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
  • Page 66 ■When Indicator E11 is Turned on Open lever [2g] to the right ( 1 ), turn knob [2c] counter- clockwise ( 2 ), and remove the jammed paper ( 3 ). Return lever [2g]. ■When Indicator E12 is Turned on Pull out the Tri-Fold Output Tray [2d].
  • Page 67 Finisher In this guide, “Finisher” and “Finisher with Booklet Maker” are generally referred to as “Finisher”. Device Components / Caution Labels Component Function Hole Punch Waste Container Punched pieces go in here. Refer For the discard method of waste in the waste container, refer to the label affixed on the machine.
  • Page 68 Component Function Booklet Tray Saddle stitch and single fold paper is ejected. Note When the Square Back Fold Trimmer is equipped, it is installed to the Square Back Fold Trimmer. Cover Open this cover to clear paper jams, replace the Staple Cartridge, remove jammed staples or dispose of cut pieces for punched holes.
  • Page 69 Description Item Finisher Finisher with Booklet Maker Booklet Finishing Capacity Saddle Staple: 30 sheets (90 g/m or less) Single Fold: 5 sheets (220 g/m or less) Paper size Standard Size: Max SRA3 (320 x 450 mm), 12.6×19.2“ (320 x 488 mm), Min JIS B5 Custom Size: 182 x 257 mm to 330 x 488 mm Paper weight...
  • Page 70 Outputting Paper Top Output Tray Loading Guide Place it on the Top Output Tray when using an envelope. Changing Angle Change the angle when output paper remains at the exit and paper full is detected immediately. Especially in the following case, paper full is likely to be detected, change the angle to the B posi- tion.
  • Page 71 ■Banner Print Extension Kit Long paper can be loaded without its lead edge sticking out. Paper size (mm) Tray capacity (sheets) Width: 210 to 330.2 Up to 660 mm: 150 Length: 488.1 to 1,200 Up to 729 mm: 100 More than 729.1 mm: 10 Note This value applies if 82 g/m2 paper is used.
  • Page 72 Change the angle of the Top Output Tray to the lower fixed position (A). Install the wires on the extension trays. Note As holding the extension tray with a hand, insert the fixing devices firmly, and check that the wires will not come off from the extension tray.
  • Page 73 Replacing Staple Cartridge / Staple Waste Container Consumables recommended by SHARP are manufactured under the standards suitable for this machine. Using consumables not recommended by SHARP may affect print quality or perfor- mance provided by the product. Use consumables that SHARP recommends for this machine.
  • Page 74 Department. Paper is not stapled Staple is bent If the staple looks like any of the following images, contact your dealer or nearest SHARP Service Department. One side of the staple is loose Staple is bent in the wrong direction...
  • Page 75 Staple Cartridge for Side Stitch Confirm that the machine is not operating, and open the Cover. Pull out [R1]. Note After removing the Staple Cartridge, check to make sure that there is no staple inside of the Finisher. Open the cover of the unit and remove the jammed staples.
  • Page 76 Remove the jammed staples. Insert the Staple Cartridge into the original position. Hold the handle and lightly press it up until you hear a click. Note Align the “” marks. Push in the Booklet Maker [3]. Close the cover. When Staple Cartridge for Side Stitch Comes off If the Staple Cartridge comes off from the unit due to fall during operation, etc., perform the fol- lowing steps.
  • Page 77 Turn it over as the handle is at the moved position and take out the Staple Cartridge from the unit. Remove the staples that stick out from the Staple Cartridge. Caution Please be very careful not to hurt your fingers, etc. when separating staples. Insert the Staple Cartridge into the unit.
  • Page 78 Paper Jams Note The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks, first of all perform the paper jam operation. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper.
  • Page 79 ■When Indicator E2 is Turned on Open lever [1c] to the right ( 1 ), turn knob [1e] clock- wise ( 2 ), and remove the jammed paper ( 3 ). Note Jammed paper may be hidden at the upper section. Return lever [1c].
  • Page 80 ■When Indicator E6 is Turned on Remove the jammed paper that sticks out from the exit of the Finisher Tray. Open and close the cover. Close the cover. Check the curl direction of the jammed paper and correct the curl. Refer "Curl Correction"...
  • Page 81 ■When Indicator E8 is Turned on Pull out Booklet Maker [3]. Note Confirm that paper is not jammed at the lever [3a] before pulling it out. Turn knob [3b] counterclockwise ( 1 ) and remove the jammed paper ( 2 ). Push in the Booklet Maker [3].
  • Page 82 Square Back Fold Trimmer Device Components / Caution Labels Component Function Left Cover Open this cover to clear paper jams. Right Cover Open this cover to clear paper jams. Booklet Tray Outputs are delivered here. Note When Square Back is performed, a thin press mark parallel to the back is made.
  • Page 83 Main Specifications Item Description Paper size Same as the paper size of the Finisher Booklet Finishing. Paper weight Same as the paper weight of the Finisher Booklet Finishing. Booklet Tray capacity 20 sets Face Capacity Saddle Staple: 30 sheets, Single Fold: 5 sheets Trim Trim dimensions 2 to 20 mm...
  • Page 84 Waste Container Note Dispose cut pieces while the machine is on. Confirm that the machine is not operating, and pull out the waste container. Hold the belt of the waste container and pull it out with both hands. Note Do not apply excessive load on the belt by twirling the container as holding the belt, etc.
  • Page 85 Paper Jams Note The error indicator at the top of the machine is turned on. If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the screen to remove the jammed paper. Gently remove the paper being careful not to tear it. If paper is torn while it is being removed from the machine, remove all the torn pieces making sure that none remain inside the machine.
  • Page 86 Turn knob [3b] clockwise and remove the paper. Close the Left Cover. ■When Indicator E2 is Turned on Open the Left Cover. Remove the jammed paper. Close the Left Cover. ■When Indicator E3 is Turned on Open the Right Cover. Remove the jammed paper.
  • Page 87 SHARP CORPORATION December 2023 Edition 1 GM1876E5-1...

This manual is also suitable for:

Bp-1200c

Table of Contents