Table of Contents
Advertisement
Paper Jams
Note
The error indicator at the top of the machine is turned on. When the priority device indicator (top lamp) blinks,
first of all perform the paper jam operation.
If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on
the screen to remove the jammed paper.
Gently remove the paper being careful not to tear it. If paper is torn while it is being removed from
the machine, remove all the torn pieces making sure that none remain inside the machine.
When you have finished clearing the paper jam, printing is resumed from the state before the pa-
per jam occurred.
Note
Clear the paper jams while the machine is on.
Paper Tray
1.
Remove the jammed paper.
When Indicator E5 is Turned on .................................................................................................p.14
When Indicator E6 is Turned on .................................................................................................p.14
When Indicator E7 is Turned on .................................................................................................p.15
■When Indicator E5 is Turned on
(1)
Open the Upper Cover and remove all the jammed papers
and papers loaded on the tray.
(2)
Close the cover.
(3)
Align the 4 corners of the removed papers and load them
again.
■When Indicator E6 is Turned on
(1)
Pull out the Paper Tray A1/A2-1 toward you until it stops.
Note
Confirm that no paper is jammed inside the Right Cover before pulling it out.
(2)
Remove the jammed paper.
(3)
Confirm the paper guide position and push in the Paper
Tray.
14
Optional Units Manual
Advertisement
Chapters
Table of Contents
