Table of Contents
Advertisement
8.
Load remaining sheets with the printed side facing
up, and align the paper edges in the direction of the
arrow (
).
1
9.
Adjust the short-side paper guide to the correct pa-
per size (
).
2
To leave a space, pinch the paper guide grip to move.
To narrow, push the paper guide to move.
10.
Close two covers.
488.1 to 864 mm Paper
1.
Remove the paper loaded on the Bypass Tray.
2.
Open two covers.
3.
Turn the lever on the left of the long-side paper guide
upward.
4.
Remove any paper remaining in the Tray.
5.
If the short-side paper guide is standing, store it.
(1)
Open the shutter while pinching the lever.
(2)
Lay the paper guide down while holding the release lever.
(3)
Close the shutter while pinching the lever.
6.
Fan the paper well and load about 100 sheets with
the printed side facing up, and the paper edges
aligned in the direction of the arrow (
7.
Pinch the right side long-side paper guide grip and
adjust to the correct paper size (
).
1
).
2
1
2
2
1
2
2
1
Air Suction Feeder
3
31
Advertisement
Chapters
Table of Contents
