Table of Contents
Advertisement
3.
Fan the paper well and insert it along the paper guide
all the way until it touches the back, with the printed
side facing up.
4.
Secure the 4 screws of the paper guide.
Special Media Setting
■Hole Punched Paper
Orientation: Place the holes of paper on the right side when you face the front side of machine.
■Precut Tab
Orientation: Place the tabs of paper on the left side when you face the front side of machine.
■Postcards
Orientation: SEF
Bypass Tray for Long Paper
Load long paper in the Bypass Tray without its rear edge sticking out.
Width: 210 to 330.2
Length: 488.1 to 1,200
Important
When paper exceeding the tray capacity is loaded, the Extension Kit may get broken.
■Extension Kit
(1)
Insert the extension tray all the way in.
Note
Insert it until it stops.
￭ When not in use
Hang them on the holder at the side.
10
Optional Units Manual
Paper size (mm)
Tray capacity (sheets)
Up to 729 mm: 150
More than 729.1 mm : 10
Note
This value applies if 82 g/m2 paper is used.
Advertisement
Chapters
Table of Contents
