Sharp BP-1200S Optional Units Manual page 15

Digital full color production printer
Hide thumbs Also See for BP-1200S:
Table of Contents

Advertisement

■When Indicator E7 is Turned on
(1)
Pull out the Paper Tray A1/A2-2 toward you until it stops.
Note
Confirm that no paper is jammed inside the Right Cover before pulling it out.
(2)
Remove the jammed paper.
(3)
Confirm the paper guide position and push in the Paper
Tray.
Inside of the Right Cover
(at Single or Right Side at Continuous Feed Configuration)
1.
Open the Right Cover.
2.
Remove the jammed paper.
When Indicator E1 is Turned on .................................................................................................p.15
When Indicator E2 is Turned on .................................................................................................p.15
When Indicator E3 is Turned on .................................................................................................p.16
When Indicator E4 is Turned on .................................................................................................p.16
■When Indicator E1 is Turned on
(1)
Open lever [1d] upward ( 1 ), turn knob [1c] clockwise
( 2 ), and remove the jammed paper ( 3 ).
(2)
Return lever [1d].
■When Indicator E2 is Turned on
(1)
Open lever [1a] to the right ( 1 ), turn knob [1c] clock-
wise ( 2 ), and remove the jammed paper ( 3 ).
Note
Turn knob [1c] 3 times or more.
(2)
Return lever [1a].
1
2
3
3
1
2
High Capacity Feeder
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bp-1200c

Table of Contents