Suzuki LT-Z400 2003 Service Manual page 179

• Remove the spacer
CD.
Inspect the bushing and dust seal for wear or damage. If any
damages are found, replace the shock absorber with a newone.
• Apply SUZUKI SUPER GREASE "A" to the bushing and dust
seals before remounting .
.0
99000-25030: SUZUKt SUPER GREASE " A" (USA)
99000-25010: SUZUKt SUPER GREASE "A" (Others)
KNUCKLE
Inspect the knuckle for damage. If any damages are found.
replace the knuckle with a new one .
KNUCKLE END
Inspect the knuckle end boot for wear or damage. If any dam·
ages are found , replace the knuckle end with a new one .
Inspect the knucle end for smooth movement. If there are any
abnormalities, replace the knuckle end with a new one.
• Remove the snap ring.
• Remove the knuckle end by using the special tools.
Gib
09913-70210: Bearing Installer set
CHASSIS 6-31