GMI CBL-5464-4.STL Assembly Instructions

TOOLS REQUIRED FOR ASSEMBLY

Socket set, Open end wrench set, Cordless drill with
3/8" socket bit (Magnetic recommended).

BEFORE ASSEMBLING THE WORKBENCH

Read through the assembly instructions to
familiarize yourself with the order in which the
parts are assembled. We suggest that you clear
& vacuum the area where the bench is to be
assembled. It is important that the bench is
assembled in the same sequence as instructed.
HARDWARE & GMI COMPONENTS
All assembly hardware is provided. Full size photos
accompany each step where hardware is needed.
**Units are difficult to move once assembled.
Begin assembly in the bench's final location**
Place 2 cabinets back-to-back. If your floor
isn't level, they may not sit at the same height.
You can adjust the cabinets' height by turning
the leveler inserts in the bottom of the cabinets.
(It is much easier to adjust before the cabinets
are bolted together)
Once adjusted, Open the doors of the cabinets
and attach using (4) 5/16 x 1/2" Bolts with Lock
Nuts. Requires 2 people.

FOR STEEL TOPS W/ WOOD CORE:

Carefully flip the top right side up & place on
the cabinets as shown to the right.
Adjust top so that it sits centered on the
cabinets. Attach using (8) #14 x 1" Lag
Screws.
5-16 x 1/2"
Hex Head Bolt
Nylock Nut
CBL-5464-4.STL