GMI CBL-5464-0.M Quick Start Manual

TOOLS REQUIRED FOR ASSEMBLY

Socket set, Open end wrench set, Cordless drill with
3/8" socket bit (Magnetic recommended).

BEFORE ASSEMBLING THE WORKBENCH

Read through the assembly instructions to
familiarize yourself with the order in which the
parts are assembled. We suggest that you clear
& vacuum the area where the bench is to be
assembled. It is important that the bench is
assembled in the same sequence as instructed.
Attach the back brace to each
of the legs in 2 places. Bolts
should go thru the back brace
into the leg.
Use four 5/16 x 1" Hex Head
Bolts & four 5/16 Lock Nuts.
Attach the shelf to the back brace
in 3 places using #8 x 5/8 black
screws.
Attach the shelf to the legs using
two 5/16 x 3/4" Hex Head Bolts &
two 5/16 Lock Nuts per leg.
Bolts should go thru the shelf
into the leg.
Shelf to
Back Brace
Shelf to
Leg
CBL-5464-0.M