Table of Contents
Advertisement
Quick Links
TOOLS REQUIRED FOR ASSEMBLY
Socket set, Open end wrench set, Cordless drill with
3/8" socket bit (Magnetic recommended).
BEFORE ASSEMBLING THE WORKBENCH
Assembly of this bench will require 2 people.
Read through the assembly instructions to
familiarize yourself with the order in which the
parts are assembled. We suggest that you clear
& vacuum the area where the bench is to be
assembled. It is important that the bench is
assembled in the same sequence as instructed.
HARDWARE
All assembly hardware is provided.
The legs have come pre-set a tlab
height. If you would like to change
the height, remove 4 screws per leg
and adjust taller or shorter.
Lean one end of the shelf onto
a leg. Hand start bolts into the
4 threaded inserts.
Use (4) 1/4-20 x 1/2" bolts.
Set the opposite end of the shelf
onto the second leg. Hand start
4 bolts to attach shelf
to the second leg. Do Not fully
tighten.
Use (4) 1/4-20 x 1/2" bolts.
BT BENCH ASSEMBLY INSTRUCTIONS
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GMI BT BENCH
Summary of Contents for GMI BT BENCH
- Page 1 BT BENCH ASSEMBLY INSTRUCTIONS TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLING THE WORKBENCH Assembly of this bench will require 2 people. Read through the assembly instructions to familiarize yourself with the order in which the parts are assembled.
- Page 2 Attach top support braces to the front & back of each leg. Note: Some benches will only require one back brace. Use (4) 1/4-20 x 1/2" bolts per supplied brace. Once braces are attached, fully tighten the 8 bolts for the shelf. Angle brackets are provided for Front View mounting the top to the leg assembly.
Need help?
Do you have a question about the BT BENCH and is the answer not in the manual?
Questions and answers