Erickson 07400 Manual

• Read, understand, follow and save all instructions before attaching and/or using product. NEVER allow
anyone unfamiliar with these instructions to use this product.
• Read, understand, follow and save all instructions provided by the manufacturer of the product(s)
that this ramp will be used with.
• Failure to follow these warnings and instructions may result in property damage, serious bodily injury,
and/or death.
• Exercise extreme caution when loading or unloading your equipment.
• DO NOT exceed 750 lbs. gross weight per ramp.
• Replace worn, broken or brittle planks immediately.
• If loading or unloading from a vehicle, be sure the vehicle is parked with emergency brake ON and
engine OFF.
• Park on solid, level surface.
• Ramp tops must be securely positioned on loading surface while loading and or unloading.
• DO NOT ride or drive powered equipment up or down the ramp. Pull with winch or push.
• DO NOT attempt to load or unload power equipment with engine running.
• DO NOT leave ramps unattended when attached.
IMPORTANT NOTICE ABOUT LOADING ON A TAILGATE
• Erickson Manufacturing does not recommend the loading or
unloading of equipment on a tailgate.
• It is recommended that if you choose to load or unload using a
tailgate that you take the proper precautions and support your
tailgate with a approved Tailgate Support.
• For more information visit
MANUAL
MAY CAUSE INJURY OR DEATH
ITEM# 07400
www.dgmtailgatesupport.com