Specifications - Flo SmartTWO Installation Manual

Specifications

Model: SmartTWO TM
EVSE type: Level 2
Output connector: SAE J1172 compliant
Split Phase 120/240 VAC Supply or 3 phase 120/208 VAC (must be protected by a 40 A fuse
or circuit breaker) Maximum output power: 7.2 kW @ 240 VAC or 6.3 KW @ 208 VAC
Built-in protection against overvoltage conditions and leakage current to ground
Ingress Protection rating: 3R enclosure type, suitable for outdoor use
Shipping weight: Approximately 30 kg for the single pedestal configuration
Patent: US 9,421,878B2
Security standard compliance:
CSA C22.2 No. 0-10 General Requirements – Canadian Electrical code, part II
•
CSA 281.1-12/UL2231-1 Standard for safety for personnel protection systems for
•
electrical vehicle
(EV) supply circuits: General requirements
254081
CSA 281.2-12/UL2231-2 Standard for safety for personnel protection systems for
•
electric vehicle (EV) supply circuits: Particular requirements for protection devices
for use in charging systems
CSA C22.2 No. 280-13/UL2594 (1st edition) Electric vehicle supply equipment
•
(EVSE)
Supported communication protocols: ONP and OCPP
•
This product is approved by the California Type Evaluation Program
Electrical standard compliance: Certified ENERGY STAR® 1.2
NOTE: The SmartTWO-M is not certified ENERGY STAR® 1.2.
Product Symbols
The following symbols appear on the station and in this guide:
4