Toolkit Configuration; Home - Honeywell 7561-PSDS User Manual

MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE

Toolkit Configuration

The Toolkit (Windows 10 & 11) is used to configure the handheld and offer
™
additional configuration options than are offered in the in-built menu system of the
handheld.
Everything that the user can interact with in the Toolkit is highlighted in the blue
accent color.

Home

Figure 24. Home Screen
When the user connects the handheld to the PC using a USB cable, it creates a
virtual COM port on the PC.
All detected PSDS devices are displayed in the drop-down list and the user needs to
select the appropriate one.
If only one handheld is detected, the user may not see this page as the Toolkit will
automatically select and connect to it.
After selecting the Serial port, click the Connect button.
,
NOTE
Pressing F12 will toggle on/off the information panel displayed on the right of the
window.
TABLE 10. HOME SCREEN
Item
Serial Port drop-down
Connect button
Description
Select from the list of detected serial ports. Select the
one that the handheld is connected to
Connect to the device using the selected serial port
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast | 34