MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE
Enclosure
The enclosure is made from ABS with a soft polymer over mold for grip and shock
absorption.
The enclosure, window, and keypad should be wiped down with a damp cloth and a
mild detergent (such as dishwashing liquid) or isopropyl alcohol.
It is weatherproof and can be washed with a damp cloth. Ensure that the battery
compartment is tightly closed.
,
NOTE
Avoid using abrasive cleaners. Avoid using anything containing acetone or cellulose
Dimensions
Figure 51. Dimensions
The mating connector will add another 45 mm to the height not including any cable.
Weight with no mating connector is 350 g.
Battery Compartment
Before re-attaching the battery compartment cover, check the rubber seals and
grooves for any debris that may compromise the enclosure's water resistance.
,
NOTE
The battery compartment cover should remain with the handheld case it was
shipped with.
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast
| 69