MODEL 7561-PSDS
PORTABLE SENSOR DISPLAY – STRAIN BRIDGE
Firmware Upgrade Tab
Figure 37. Firmware Upgrade Tab Screen
This section allows the firmware in the handheld to be updated.
,
NOTE
The toolkit must be launched using the 'Run As Administrator' option to enable
firmware update to work.
TABLE 18. FIRMWARE UPGRADE
Item
Firmware Upgrade button
Description
Click the button to open the upgrader window
Click Load File button to select the .srec firmware file.
Click Start Programming to initiate the update, then
follow onscreen instructions. (Remove all power from
the device before attempting to reconnect.)
Model 7561-PSDS User Manual |
Issue A
008-0752-00
sps.honeywell.com/ast
| 49